Toshiba TDP-S1-US User Guide - Page 34
Heading2 - Using the Security Lock, Cable Lock System Refer to the information
View all Toshiba TDP-S1-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
M a i n t e n a n c e & Tro u b l e s h o o t i n g 8 Align the new lamp module in the correct direction. 9 Gently push the module in as far as it goes. 10 Tighten the screws on the outside of the module. 11 Slide the lamp connector to the left to re-attach it. 12 Insert the tabs at the top of the lamp door into the projector and press the lamp door into place. 13 Plug in the power cord and turn the projector back on. 14 To reset the lamp hour counter in the Status window, press and hold the left mouse button, then press the menu button (while still holding down the mouse button) for 5 seconds. Verify that the counter was reset by pressing the menu button and viewing the counter in the Status window. Using the Security Lock The projector has a security connector for use with a PC Guardian Cable Lock System (Figure 23). Refer to the information that came with the lock for instructions on how to use it to secure the projector. FIGURE 23 Installing the security lock 30