Toshiba Tecra A8 PTA83C-KF801F Users Manual Canada; English - Page 165
Installing a memory module, in Getting Started.
View all Toshiba Tecra A8 PTA83C-KF801F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Optional Devices Installing a memory module There are slots for two memory modules, one over the other. The procedures are the same for installing either module. 1. Set the computer to boot mode and turn the computer's power off. Make sure the Power indicator is off. Refer to the Turning off the power section in Chapter 3, Getting Started. 2. Remove AC adaptor and all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack. Refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, for details. 4. Loosen the screw securing the memory module cover. The screw is attached to the cover to prevent it from being lost. 5. Insert your fingernail or a thin and flat object under the cover and lift it off. Memory module cover Screw Figure 8-5 Removing the memory module cover 6. Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before pressing it down until the latches on either side snap into place. Slot B Memory module Slot A Figure 8-6 Seating the memory module User's Manual 8-7