Tripp Lite 9PX6KL Eaton 9PX 6KVA Lithium-Ion Advanced Users Guide 9PX6K-L 9PXE - Page 15
Table6.UserSettingsContinued, Submenu, Available Settings, Default settings
View all Tripp Lite 9PX6KL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
User Settings Table 6. User Settings (Continued) Submenu Available Settings Default settings High Efficiency mode Bypass transfer [Enabled] [Disabled] Power the output from Bypass for high efficiency [Disabled] [Transfer if BP AC NOK] [Enabled] [Disabled] Allow transfer on Bypass out of tolerance [Disabled] Overload prealarm [10%] ... [102%] Load % when overload alarm occurs [102%] Redundancy mode [Unitary UPS] [Hot Standby] Force slew rate value to 0.5Hz/s Unitary UPS Cold Start [Enabled] [Disabled] Authorize the product to start on battery power. [Enabled] Forced reboot [Enabled] [Disabled] If mains recover during a shutdown sequence: If set to Enabled, shutdown sequence will complete and wait 10 seconds prior to restart, If set to Disabled, shutdown sequence will not complete and restart will occur immediately. [Enabled] Auto restart [Enabled] [Disabled] Authorize the product to restart automatically when mains recovers after a complete battery discharge. [Enabled] On/Off Settings Auto start Energy Saving [Enabled] [Disabled] [Disabled] The UPS automatically starts up as soon as mains power is available (no need to press the button). [Disabled] [100W] ... [1000W] If Enabled, UPS will shutdown after 5 min. of back-up time, if load is less than threshold. [Disabled] Sleep mode [Enabled] [Disabled] If Disabled, LCD and communication will turn OFF immediately after UPS is OFF. If Enabled, LCD and communication stays ON 1h30 min after UPS is OFF. [Enabled] Remote Command [Enabled] [Disabled] If Enabled, shutdown or restart commands from software are authorized. [Enabled] Bypass standby [Enabled] [Disabled] Define if output is powered from Bypass in Standby mode. [Disabled] Battery settings Low battery warning Restart bat. level [Capacity] [0%] ... [100%] The alarm triggers when the set percentage of battery capacity or remaining back-up time is reached. [0%] ... [100%] If set, automatic restart will occur only when percentage of battery charge is reached. [20%] [0%] Eaton 9PX Lithium-Ion User Guide DPD-9PX2206-Rev 01 9