Tripp Lite B0930082E4UV Owners Manual for B093- B097- and B098-Series Console - Page 142

7. Alerts, Auto-Response and Logging 7.5 Configure SMTP, SMS, SNMP and/or Nagios Service for Alert Notifications The auto-response facility enables remote alerts to be sent as Trigger and Resolve Actions. Before such alert notifications can be sent, you must configure the assigned alert service. 7.5.1 Send Email Alerts The console server uses SMTP (Simple Mail Transfer Protocol) for sending the email alert notifications. To use SMTP, the Administrator must configure a valid SMTP server for sending the email: • Select Alerts & Logging: SMTP & SMS. • In the SMTP Server field, enter the IP address of the outgoing mail Server. • If this mail server uses a Secure Connection, specify its type. You may also specify the IP port to use for SMTP. The default SMTP Port is 25. • You may enter a Sender email address which will appear as the "from" address in all email notifications sent from this console server. Many SMTP servers check the sender's email address with the host domain name to verify the address as authentic. It may be useful to assign an email address for the console server, such as [email protected]. • You may also enter a Username and Password if the SMTP server requires authentication. • Similarly can specify the specific Subject Line that will be sent with the email. • Click Apply to activate SMTP. 142