Tripp Lite B0930082E4UV Owners Manual for B093- B097- and B098-Series Console - Page 165
Adding EMDs and Configuring the Sensors
View all Tripp Lite B0930082E4UV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
8. Power, Environment and Digital I/O • When configured as Inputs, the SENSOR and DIO ports are notionally attached to the internal EMD. Go to the Serial & Network: Environmental page and enable the Internal EMD. Then configure the attached sensors as alarms, as covered in the next section. 8.3.2 Adding EMDs and Configuring the Sensors • Select the Serial & Network: Environmental menu. This will display any external EMDs or any "internal EMD" (i.e. sensors that may be directly attached to the unit) that have already been configured. • To add a new EMD, click Add and configure an external EMD. Enter a Name and (optionally) a Description. Select the preconfigured serial port the EMD will be Connected Via. 165
165
8. Power, Environment and Digital I/O
• When configured as Inputs, the SENSOR and DIO ports are notionally attached to the internal EMD. Go to the
Serial &
Network: Environmental
page and enable the
Internal EMD
. Then configure the attached sensors as alarms, as covered
in the next section.
8.3.2 Adding EMDs and Configuring the Sensors
• Select the
Serial & Network: Environmental
menu. This will display any external EMDs or any “internal EMD” (i.e. sensors
that may be directly attached to the unit) that have already been configured.
• To add a new EMD, click Add and configure an external EMD. Enter a
Name
and (optionally) a
Description
. Select the
preconfigured serial port the EMD will be
Connected Via
.