Tripp Lite B0930082E4UV Owners Manual for B093- B097- and B098-Series Console - Page 234
Nagios
View all Tripp Lite B0930082E4UV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
14. Configuration from the Command Line 14.1.22 NAGIOS To configure NAGIOS with the following settings: NAGIOS host name NAGIOS host address NAGIOS server address Enable SDT for NAGIOS ext. SDT gateway address Prefer NRPE over NSCA b098-16 (Name of this system) 192.168.0.1 (IP to find this device at) 192.168.0.10 (upstream NAGIOS server) Enabled 192.168.0.1 (defaults to host address) Disabled (defaults to Disabled) # config -s config.system.nagios.enabled=on # config -s config.system.nagios.name=b098-16 # config -s config.system.nagios.address=192.168.0.1 # config -s config.system.nagios.server.address=192.168.0.10 # config -s config.system.nagios.sdt.disabled=on (disables SDT for nagios extensions) # config -s config.system.nagios.sdt.address=192.168.0.1 # config -s config.system.nagios.nrpe.prefer='' To configure NRPE with following settings: NRPE port NRPE user NRPE group Allow command arguments 5600 (port to listen on for nrpe. Defaults to 5666) user1 (User to run as. Defaults to nrpe) group1 (Group to run as. Defaults to nobody) Enabled # config -s config.system.nagios.nrpe.enabled=on # config -s config.system.nagios.nrpe.port=5600 # config -s config.system.nagios.user=user1 # config -s config.system.nagios.nrpe.group=group1 # config -s config.system.nagios.nrpe.cmdargs=on To configure NSCA with the following settings: NSCA encryption NSCA password NSCA check-in interval NSCA port user to run as group to run as BLOWFISH (can be: [ None | XOR | DES | TRPLEDES | CAST-256 | BLOWFISH | TWOFISH | RIJNDAEL-256 | SERPENT | GOST ] secret 5 minutes 5650 (defaults to 5667) User1 (defaults to nsca) Group1 (defaults to nobody) # config -s config.system.nagios.nsca.enabled=on # config -s config.system.nagios.nsca.encryption=BLOWFISH # config -s config.system.nagios.nsca.secret=secret # config -s config.system.nagios.nsca.interval=2 # config -s config.system.nagios.nsca.port=5650 # config -s config.system.nagios.nsca.user=User1 # config -s config.system.nagios.nsca.group=Group1 The following command will synchronize the live system with the new configuration: # config -a 234