Tripp Lite B0930082E4UV Owners Manual for B093- B097- and B098-Series Console - Page 217
Serial Port Configuration
View all Tripp Lite B0930082E4UV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
14. Configuration from the Command Line 14.1.1 Serial Port Configuration RS-232 common settings are the first set of configurations to be made to any serial port. For example, to set up serial port 5, use the following properties: Baud Rate 9600 Parity None Data Bits 8 Stop Bits 1 label Myport log level 0 protocol RS232 flow control None Use the following commands: # config -s config.ports.port5.speed=9600 # config -s config.ports.port5.parity=None # config -s config.ports.port5.charsize=8 # config -s config.ports.port5.stop=1 # config -s config.ports.port5.label=myport # config -s config.ports.port5.loglevel=0 # config -s config.ports.port5.protocol=RS232 # config -s config.ports.port5.flowcontrol=None The following command will synchronize the live system with the new configuration: # config -r serialconfig Note: Supported serial port baud-rates are '50', '75', '110', '134', '150', '200', '300', '600', '1200', '1800', '2400', '4800', '9600', '19200', '38400', '57600', '115200', and '230400'. Supported parity values are 'None', 'Odd', 'Even', 'Mark' and 'Space'. Supported data-bits values are '8', '7', '6' and '5'. Supported stop-bits values are '1', '1.5' and '2'. Supported flow-control values are 'Hardware', 'Software' and 'None'. Additionally, before any port can function properly, the port mode needs to be set. Any port can be set to run in one of the five possible modes: [Console Server mode | Device mode | SDT mode | Terminal server mode | Serial bridge mode]. All these modes are mutually exclusive. Refer to 4. Serial Port, Host, Device and User Configuration for details. Console Server Mode The command to set the port in portmanager mode: # config -s config.ports.port5.mode=portmanager To set the following optional config elements for this mode: Data accumulation period 100 ms Escape character % (default is ~) log level 2 (default is 0) Shell power command menu Enabled RFC2217 access Enabled Limit port to 1 connection Enabled SSH access Enabled TCP access Enabled telnet access Disabled Unauthorized telnet access Disabled # config -s config.ports.port5.delay=100 # config -s config.ports.port5.escapechar=% # config -s config.ports.port5.loglevel=2 # config -s config.ports.port5.powermenu=on # config -s config.ports.port5.rfc2217=on # config -s config.ports.port5.singleconn=on # config -s config.ports.port5.ssh=on # config -s config.ports.port5.tcp=on # config -d config.ports.port5.telnet # config -d config.ports.port5.unauthtel 217