Tripp Lite SU5000RT4UHV Owner's Manual for SmartOnline Single-Phase 5kVA-6kVA - Page 18
Normal Operation, UPS Setup Menu
View all Tripp Lite SU5000RT4UHV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Operation (continued) Normal Operation Display Information Parallel Mode (12kVA model only): PARALLEL MODE 00.00KW / 000% PARALLEL: MASTER 00.00KVA / 000% INPUT VOLTAGE 000V / 00.0Hz BYPASS VOLTAGE 000V / 00.0Hz OUTPUT VOLTAGE 000V / 00.0Hz BATTERY CAPACITY 000V / 000% REMAINING TIME 0000 MINUTES ON-LINE 6KVA V00 CV01 NOTE: When two units are connected in parallel, the "Master UPS" will display "PARALLEL: MASTER" in this second screen. The display on the "Secondary UPS" will read "PARALLEL: SLAVE". If the two units are not paralleled successfully, both units will read "STANDALONE" in this second screen. UPS Setup Menu Press the UPh and DOWNi buttons simultaneously for 3 seconds until the SETUP MENU screen appears as seen below: UPS SETUP EXIT ENTER Press the UPh button to enter Set Up Mode. To enter Set Up Mode, you will be required to enter a password. PASSWORD : 0000 ENT DOWN UP XX Numbers increase or decrease by 1 when pressing the UPh and DOWNi buttons (0-9). Scroll to select the first number, then press the ON button. This saves the first number and moves on to the next in the sequence. The password range is 0000-9999 and should be changed by the administrator. The DEFAULT password is 1234. 18 201207113 933070.indb 18 9/17/2012 1:20:08 PM