Troy-Bilt Pro-Line CRT Service Manual - Page 9
Drive Belt Replacement,
View all Troy-Bilt Pro-Line CRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4. DRIVE BELT REPLACEMENT: 4.1. Remove the spark plug boot from the spark plug and ground it to the engine. See Figure 4.1. Spark Plug Troy-Bilt Small Frame Tillers 4.4. Remove the belt from the engine drive pulley and forward idler pulley. See Figure 4.4. Drive Pulley Forward Idler Pulley Drive Belt Spark Plug Boot Grounded Figure 4.1 4.2. Remove the hex flange screw and large flat washer securing the belt cover to the lower cable mounting bracket using a 3/8" socket. See Figure 4.2. Hex Flange Screw Large Flat Washer Belt Cover Clutch Cable Figure 4.4 4.5. Remove the belt from the transmission pulley. See Figure 4.5. Belt Transmission Pulley Figure 4.2 4.3. Pivot the belt cover on the forward clutch cable until it is out of the work area. Figure 4.5 4.6. Install the new belt in the reverse order above. NOTE: Make certain the belt keepers are correctly positioned prior to installing the belt cover. 4.7. Perform the Forward Clutch Cable Adjustment section. 5