Uniden A1-R7 English Owner Manual - Page 10

ELEMENT MUTE button (Although not labeled, press and hold MUTE to access DIM functions) LED (Red) USB Port WHAT IT DOES... • Press the MUTE button to mute an alarm. Returns to normal operation 10 seconds after the alert ends or if a different band is detected during Mute mode. Mute On displays on the R7 for a few seconds. • Save a Mute location (Mute Memory) - press the MUTE button again while Mute On displays on the R7 to save that GPS location and frequency to memory. Mute Memory displays on the screen. R7 stores 2000 points divided between Mute Memory and User Mark locations. • Delete Mute Memory - Press the MUTE button while Mute Memory displays on the R7; the R7 displays a delete confirmation message. Press the MUTE button again to confirm. • Red Light Camera Point Alert Mute/Delete - When R7 alerts you to a red light camera (the alert displays), you can press MUTE to mute or delete (press and hold) that camera point. After confirming this deletion, R7 will not give an alert for that camera. • Mute Overspeed Alarms - When R7 alerts you to an overspeed or speed limit situation (an alarm sounds and the alert displays), you can press MUTE to silence that alarm • Press and hold the MUTE button to change the OLED display brightness. DIM function. Press and hold for DIM options to display on the OLED. Press the button again to scroll through and select one of the following options: • Auto (Default; see page 20 to set OLED brightness levels.) • Bright • Dim • Dimmer • Dark (Dark is off unless there is alert.) • Off (Off regardless of whether or not there is an alert.) Dim level cannot be changed during a Red Light Camera alert. • Off: Power is off. • Steady on: Power is on. • Flashing: Receiving an alert. The faster it flashes, the stronger the signal. Use this USB port to charge mobile devices. - 10 -