Uniden A1-R7 English Owner Manual - Page 8

KEY MUTE/ DIM PRESS TO... PRESS AND HOLD TO ... MUTE MUTE on - Press MUTE/DIM to mute an alarm. Returns to normal operation 10 seconds after the alert ends or if a different band is detected during Mute mode. Mute On displays for a few seconds. MUTE off - Press MUTE/DIM to restore audible alarms before the 10 second automatic mute time-out. MUTE MEMORY Save a Mute Location (Mute Memory) press MUTE/DIM again while Mute On displays to save that GPS location and frequency to memory. Mute Memory displays on the screen. DIM - Changes the display brightness: Auto (Default). Set brightness levels for the OLED display (see page 20). Bright Dim Dimmer Dark (Dark is off unless there is alert.) Off (Off regardless of whether or not there is an alert.) R7 stores 2000 points divided between Mute Memory and User Mark locations. Delete Mute Memory - Press MUTE/ DURING RED LIGHT DIM while Mute Memory displays; the R7 CAMERA ALERT displays a delete confirmation message. Press and hold MUTE/ Press MUTE/DIM again to confirm. DIM to delete the red light MUTE RED LIGHT CAMERA VOICE ALERT camera point. Mute the voice alert for a red light camera alarm. Press MUTE/DIM while the voice RED LIGHT CAMERA POINT DELETE alarm for a red light camera sounds. The When R7 alerts you to a voice alarm mutes. red light camera (the alert MUTE ALERTS FOR POI OVERSPEED ALERT displays), you can press AND USER LIMIT SPEED and hold MUTE/DIM to When R7 alerts you to an overspeed or speed limit situation (an alarm sounds and the alert displays), you can press MUTE/ DIM to silence that alarm. delete that camera point. After confirming this deletion, R7 will not give an alert for that camera. If Overspeed Alert and Radar Alert alarms are detected at the same time, R7 alternates between these two alarms. - 8 -