Uniden BC125AT English Owner's Manual - Page 30
Turning.on.the.scanner - reset
View all Uniden BC125AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Key/ Icon / Press to... • Turn scanner on and off (press and hold). • Turn backlight on and off. Press Func and this key to... Enter the Display/Charge menu. Pgm/E • Select input data or a menu item. • Access a channel through its channel number. • Enter Channel Programming menu. • Quickly save frequencies in various modes. 4/< • Enter 4. NA • Scroll left in Edit Tag mode. 7/Beep Enter 7. Toggle the Keybeep setting. Note: Turn Scroll Control to scroll up and down through menu selections. Turning On the Scanner Note: Make sure the scanner's antenna is connected before you turn it on. 1. Press and hold for 1 second to turn on the scanner. The opening screen displays, followed by the copyright notice. 2. If the scanner is new or has been reset, the default mode is Scan Hold with all banks enabled and Close Call DoNot-Disturb active. Otherwise, the scanner displays the last mode the scanner was in before it was powered down. 30