Uniden BC125AT English Owner's Manual - Page 38
Programming.channels - drivers
View all Uniden BC125AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
USB drivers and programming software are available for download from http://info.uniden.com/UnidenMan4/BC125AT. PROGRAMMING CHANNELS Now that you have configured your scanner, you are ready to start using your scanner's preprogrammed service banks, the custom search banks, the Close Call feature, or the Weather Scan/Alert feature. You can also program your channel memories or re-program your 10 custom search bank memories. Before the scanner can begin scanning, you must program a frequency into at least one channel. 1. To select a channel, press Hold then enter the channel number (1-500). 2. Press Pgm/E to enter the Channel menu. (You can also press Hold and scroll to the channel; press Func then Pgm/E.) Note 1: Turning Scroll Control in Function mode will allow you to select the first channel in each bank. Note 2: You can quickly store frequencies in Scan Hold mode by entering the frequency and pressing Pgm/E. 3. Scroll to highlight Enter Frequency and press Pgm/E. You will see the channel number and currently programmed frequency. (To return to the previous screen, press . Clr.) 4. Use number keys and . Clr for a decimal to enter the frequency. If you make a mistake, press . Clr to clear the display. Press Pgm/E to store the frequency and return to the Channel menu. 38