Uniden BC125AT English Owner's Manual - Page 65
Weather.alert.standby
View all Uniden BC125AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Note 1: NOAA broadcasts are continuous broadcasts. You only lose reception if you move out of a coverage area. If the signal is lost, the scanner resumes searching for a weather transmission. Note 2: You cannot lock out weather frequencies. Weather Alert Standby In Weather Alert mode, your scanner functions as a severe weather warning radio. This is especially useful when your area is expecting severe weather conditions late at night. When you set the scanner to Weather Alert mode, it scans the weather channels, but does not play the channel's audio. To turn Weather Alert Standby on or off, press Func then 3(WX) to view the Weather menu. Scroll to Weather Standby and press Pgm/E. The upper line displays WX Alert Standby and the lower lines display the channel number with the frequency and modulation. When the scanner detects the Weather Alert Tone (1050Hz), the scanner goes into Hold mode, immediately sounds a Weather Alert siren and displays WX Alert Warning. This siren sounds as long as the Weather Alert Tone (1050Hz) is broadcasted. Pressing any key stops the siren, opens the squelch, then monitors the Weather channel. To exit Weather Alert Standby mode, press Scan. 65