Uniden BCT15 English Owners Manual - Page 80

Setting the System Hold Time C [MENU] Program System F Select a conventional system F Edit Sys Options F Set Hold Time F Set how long the scanner will remain scanning on this system before moving to the next system (up to 255 seconds). Note that the scanner will scan all unlocked channels at least one time, regardless of the system hold time setting. Setting ID Scan/ID Search [MENU] Program System F Select a system F Edit Sys Options F ID Scan/Search F MEL Sets whether the scanner only stops on talk groups you have programmed in (ID Scan) or whether the scanner stops on any unlocked channel (ID Search). Setting Channel Delay Time [MENU] Program System F Select a system F Edit Sys Option F Set Delay Time F MELCS This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from 1-5 or Off, then press F. Notes: • The default setting is 2 seconds for each system. • This setting applies to all channels within the system. Setting Data Skip C [MENU] Program System F Select a Conventional system F Edit Sys Option F Set Data Skip F This setting controls whether the scanner automatically skips channels it identifies as data. This includes channels with either no audio or a constant-level audio 80