Uniden DCT5260 English Owners Manual - Page 22

For Deregister HS, make sure the line is not in use, and the handsets are within the range limits of the base. System Reset This menu is used to clear the handset ID from the base, or the base ID from the handset. Submenu name Deregister HS Replacing Base Description Clear the handset ID from the base. Use this menu, for example when you change the digital security code (see page 25). Clear the base ID. Use this menu, for example, if you replace the base with a different base of the DCT series model (DCT5260/DCT5280/DCT5285 series) (see page 25). Setting up the Menu Entering the Menu 1) Press the MENU soft key in the standby mode. 2) Use volume/ L or M to move the pointer to a desired main menu (DirectLink Mode, Handset Setup, Global Setup, and System Reset). SUN 12:00A Handset #1 New: 5 MENU CID RDL PB MENU 3) Press the OK soft key to enter the menu. To return to the previous screen, press the BACK soft key. 4) Use volume/ L or M to select a desired submenu, then press the OK soft key to enter. DirectLink Mode Handset Setup Global Setup BACK OK In the submenu, volume/ L or M is used to select an item. Press the OK soft key to confirm your selection. To return to the previous screen, press the BACK soft key. For detailed instructions, see the following sections for the desired submenu. 5) To exit the menu, press the end key. • If any of the following occurs during the menu operation, the operation will be cancelled. - Press the end key. - Press talk/flash or speaker. - Charge the handset. - Receive an outside/intercom call or page. • If the handset remains idle for 30 seconds, the phone will return to the standby mode. [ 20 ] G E T T I N G S T A R T E D