Uniden DCT5260 English Owners Manual - Page 49
Register the Handset
View all Uniden DCT5260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
EXPANDING YOUR PHONE 3) Install the new batteries supplied with your phone. Check for correct polarity (see page 13). "Please Register" appears in the display. 4) Replace the battery cover by sliding it upward. 5) Place the handset in the charging cradle, and allow it to charge for 17-20 hours. While charging the batteries, all the handset keys will be disabled. Register the Handset If you purchase an extra handset, you need to register the handset before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 (#1 and #2 for DCT5260-2) in the display. When you register additional handset to the base, the handset ID will be assigned. An extra handset can be registered when the base is in the standby mode. 1) After charging the handset, remove the handset from the charger and place it in the base. 2) Registration starts automatically. While registering, "Handset Registering" appears in the display. 3) When the registration is complete, "Registration Complete" appears in the display. If the registration fails, "Registration Failed" appears in the display. Try the steps above again. E X PA N D I N G Y O U R P H O N E [ 47 ]