Uniden DCT5260 English Owners Manual - Page 36

3) Press the STORE soft key, "Store/Edit Name" appears. • When the memory is full, you will hear a beep and "Memory Full" appears. You cannot store names and numbers. • The pause key counts as one digit. Pressing the PAUSE soft key more than once increases the length of the pause between numbers. Each pause represents a 2 second delay. • Selecting a speed dial location where a number is already stored, releases the old number's speed dial setting. The new number will be stored in the speed dial location. 4) Enter the name (up to 16 characters) by using the number keypad (see the "Steps for Entering Names and Special Characters" on page 35). If a name is not required, go to step 5. will be used as the name. Store/Edit Movies BACK DELETE Name OK 5) Press the OK soft key to store the name, "Store/Edit No." appears. Store/Edit No. 8007303456 6) Press the number keypad to enter the phone number (up DELETE PAUSE OK to 20 digits), press the OK soft key to store the number. 7) "Distinctive Ring" appears. Press volume/ L or M to move the pointer to one of the Distinctive Ring options, then press the OK soft key. If you choose not to store a "Distinctive Ring", simply select the "No Selectn" option. Distinctive No Selectn Flicker BACK Ring OK 8) "Speed Dial" appears. Press volume/ L or M to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0). If you choose not to store the name/number as a Speed Dial, simply select the "No Selectn" option. Speed Dial No Selectn SPD1: BACK OK 9) Press the OK soft key. You will hear a confirmation tone and "Done!" appears in the display. Movies 800-730-3456 Flicker /SPD2 BACK DELETE EDIT [ 34 ] P H O N E B O O K