Uniden DCT5260 English Owners Manual - Page 23

GETTING STARTED DirectLink Mode Using the DirectLink Mode 1) Enter the "DirectLink Mode" menu (see "Entering the Menu" on page 20). 2) Press the ENTER soft key to enter the DirectLink mode. You will hear a confirmation tone, and "DirectLink Mode Complete" appears. 3) To return back to the normal mode, exit the DirectLink mode. To exit the DirectLink mode, press the CANCEL To enter DirectLink mode press [ENTER] BACK BACK ENTER soft key, then the OK soft key, or return the handset to the cradle. Handset Setup Programming your Voice Mail Access Number 1) Enter the "Handset Setup" menu, then the "Edit Voice Mail" submenu (see "Entering the Menu" on page 20). 2) Enter your personal access number using the number keypad (0-9), /tone/t, #/s, the PAUSE soft key, or Edit V_mail No. 1234567890 the DELETE soft key. DELETE PAUSE OK 3) Press the OK soft key. You will hear a confirmation tone. To delete the current Voice Mail Access Number, delete all numbers in step 2 using the DELETE soft key and press the OK soft key. Setting a Ringer Volume 1) Enter the "Handset Setup" menu, then the "Ringer Volume" submenu (see "Entering the Menu" on page 20). 2) Press volume/ L or M to adjust the ringer settings (Ringer Volume Off, Ringer Volume Low, or Ringer Volume Ringer Volume High). You will hear a ringer or High melody at the Selected volume (if you select "Ringer BACK OK Volume Off", no ringer or melody will sound). 3) Press the OK soft key. You will hear a confirmation tone. • If you select "Ringer Volume Off", icon appears in the display. • If you press volume/L in Ringer Volume High or volume/M in Ringer Volume Off, you will hear a beep. G E T T I N G S T A R T E D [ 21 ]