Uniden HOMEPATROL-1 English Owner's Manual - Page 31

TROUBLESHOOTING, Problem

Page 31 highlights

TROUBLESHOOTING Problem Try this... My HomePatrol-1 won't turn on. Hold the power button down for at least 3 seconds. Check that the unit is receiving power. Verify that the batteries are inserted correctly. If it is connected to a power adapter, verify that the adapter is receiving power. My HomePatrol-1 won't stop on any channels. Check for Avoided channels. Adjust antenna. Adjust Range. Adjust Squelch. Adjust Atten. Move the unit to a different location. HomePatrol-1 stops on a channel but I can't hear anything. Verify that MUTE is not on. Check the volume. Weather monitoring won't work. Adjust the antenna. Adjust the Squelch. There might not be a NOAA broadcast in your area. Move to an area with a known NOAA broadcast to verify. My HomePatrol-1 won't turn Make sure you are holding the power button down long off. enough. Press and hold for at least 3 - 5 seconds. Recording and Replay do not work. Because HomePatrol-1 writes data to the SD memory card during these operations, they are disabled if you are operating from external power only, with batteries not installed, or if battery power becomes too low when operating from batteries. I have another question...where can I go for help? Visit the HomePatrol community at http://www.HomePatrol.com for official help and support, as well as to discuss your HomePatrol-1 experiences with other users. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

TROUBLESHOOTING
Problem
Try this…
My HomePatrol-1 won’t turn
on.
Hold the power button down for at least 3 seconds.
Check that the unit is receiving power.
Verify that the batteries are inserted correctly.
If it is connected to a power adapter, verify that the adapter
is receiving power.
My HomePatrol-1 won’t stop
on any channels.
Check for Avoided channels.
Adjust antenna.
Adjust Range.
Adjust Squelch.
Adjust Atten.
Move the unit to a different location.
HomePatrol-1 stops on a
channel but I can’t hear
anything.
Verify that MUTE is not on.
Check the volume.
Weather monitoring won’t
work.
Adjust the antenna.
Adjust the Squelch.
There might not be a NOAA broadcast in your area. Move
to an area with a known NOAA broadcast to verify.
My HomePatrol-1 won’t turn
off.
Make sure you are holding the power button down long
enough. Press and hold for at least 3 – 5 seconds.
Recording and Replay do not
work.
Because HomePatrol-1 writes data to the SD memory card
during these operations, they are disabled if you are
operating from external power only, with batteries not
installed, or if battery power becomes too low when
operating from batteries.
I have another
question…where can I go for
help?
Visit the HomePatrol community at
for official help and support, as
well as to discuss your HomePatrol-1 experiences with
other users.
26