Uniden SC200 English Owners Manual - Page 25

Scanning

Get Uniden SC200 PDF manuals and user guides View all Uniden SC200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Scanning Bank Scanning 1. If SCAN is not indicated on the display, press . The SportCat should begin scanning. The indicators for the selected Banks (1 through 10) appear on the display. The indicator of the Bank currently being monitored flashes. While the SportCat is scanning, the word SCAN moves across the display. Scanning stops on any active channel that is not "Locked Out", and displays the Channel Number and frequency or Alpha Name. Scanning resumes automatically after the transmission stops. 2. You can deselect any bank(s) from being scanned by entering the number of the bank. The deselected bank indicator(s) disappear from the display, and those channels will not be scanned. This procedure helps to speed up the scanning cycle. Note: One Bank must always be active. You cannot deactivate all 10 banks at the same time. If you try to deactivate all 10 Banks, Bank 1 will automatically be active. 3. To restore any bank for scanning, just enter its number again. The bank indicator will reappear on the display. 4. To stop scanning any time, press . (HOLD appears on the display.) The scanner remains on the displayed channel, and only the bank indicator for that channel appears. Press , to resume scanning. 5. When you are stopped at a channel, you can press to step down a channel, or to step up a channel. Press and hold either key to rapidly step through the channels. Note: You do not skip a locked out ("L/O") channel when you use or . 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Scanning
Bank Scanning
1.
If
SCAN
is not indicated on the display, press
.
The
SportCat
should begin scanning.
The indicators for the selected Banks (
1
through
10
) appear
on the display. The indicator of the Bank currently being
monitored flashes. While the
SportCat
is scanning, the
word
SCAN
moves across the display.
Scanning stops on any active channel that is not “Locked
Out”, and displays the Channel Number and frequency or
Alpha Name. Scanning resumes automatically after the
transmission stops.
2.
You can deselect any bank(s) from being scanned by
entering the number of the bank. The deselected bank
indicator(s) disappear from the display, and those
channels will not be scanned. This procedure helps to
speed up the scanning cycle.
Note:
One
Bank must always be active. You cannot
deactivate all 10 banks at the same time. If you try to
deactivate all 10 Banks, Bank 1 will automatically be
active.
3.
To restore any bank for scanning, just enter its number
again. The bank indicator will reappear on the display.
4.
To stop scanning any time, press
.(
HOLD
appears
on the display.) The scanner remains on the displayed
channel, and only the bank indicator for that channel
appears. Press
, to resume scanning.
5.
When you are stopped at a channel, you can press
to step down a channel, or
to step up a channel.
Press and
hold
either key to rapidly step through the
channels.
Note:
You do not
skip a locked out (“
L/O
”) channel when
you use
or
.
23