Uniden SC200 English Owners Manual - Page 44
Menu for SmartScan, Program Lock - download
View all Uniden SC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
NOTE: The number preprogrammed into your scanner for downloading frequencies is 1-900-225-4822. There is a $0.99 per minute charge for using the SmartScan database. The frequencies in the SmartScan database are updated, at a minimum, every 6 to 12 months. To get current frequencies, as well as special /sporting event frequencies, regularly update your scanner by using SmartScan. NOTE: If you are unable to dial a "900" number, check with your local phone company to find out if you have a "900" block on your phone line. This will prevent you from dialing to the server. Menu for SmartScan Press key, Prog Lock appears in the display. And you can change several parameters used for SmartScan whenever you press . Transfer speed 300, 1200, 2400, (9600), 14400 bps Flow control setting (Xon/Xoff), RTS/CTS, Off Dial type (TONE), PULSE Program Lock SmartScanner will overwrite frequencies that you have already programmed into your scanner. To save the previously programmed frequencies, you can lock out specific banks prior to calling the database as follows: 1. After you enter your zip code, press . 2. With the phone number on the display, press . appears in the display. 3. Press the bank numbers using the 1-9 and 0 key (for bank 10) that you wish to lock out from programming so that they will not be overwritten during the download. 4. Press again. The zip code is displayed. 42