Uniden SC200 English Owners Manual - Page 43
will be displayed when your downloading is
View all Uniden SC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
6. If the connection is successful, the scanner starts clearing the memory. And during that period, will appear for 12 seconds. 7. After clearing the memory is over, the scanner starts downloading the frequency. 8. will be displayed when your downloading is completed. 9. To start the scanner, you must turn the unit off/on. If downloading is not successful, one of the following error messages will appear. "Modem Err": Modem Access Error "No Carrier": Receive No Carrier message from modem "Busy": Receive Telephone line busy message "No Answer": Receive No Answer message from modem "Error End": Quit access line by server "Timeout": Non data receive time out NOTE: If the scanner does not display Loading (see step 7), disconnect the access by pressing . Then, make sure the modem is connected properly, and try again. NOTE: If the scanner's display locks up or does not work properly after you connect power, you need to turn the scanner off then on again. 41