Uniden TRAX436 Owners Manual - Page 68
Loading a saved route - map updates
View all Uniden TRAX436 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
How Do I Use It? 1. Tap the following buttons: , , . 2. Enter a name for the saved route, and then tap . When you save a route, TRAX436 not only saves the route points but the whole itinerary: • The saved route might have been influenced by TMC information. When you later use the route, it appears as it was saved, but if it needs to be recalculated, the current TMC information will be used in the new route. • If you updated your map since you first saved the route, TRAX436 recognises the change, and recalculates the driving instructions according to the latest available map information. • TRAX436 deletes from the route the via points that you already left behind during navigation together with the road segments used to reach it. To avoid this, if you want to save the route, you need to save it before you start navigating. Loading a saved route This feature is available in Advanced mode only. The procedure is explained starting from the Map screen. 1. Tap the following buttons: , , . 2. Tap the route you wish to navigate. 3. In the very likely case when the start position of the saved route is different from the current GPS position, you need to confirm whether you want to stop navigating from the current GPS position to use the start point of the loaded route. • If you choose this option, the automatic off-route recalculation will be disabled. • If you choose to keep the current GPS position as the start point, the route will be recalculated starting from your current position. 4. The map appears, and you can start navigating. Page 68