Uniden XC645 English Owners Manual
Uniden XC645 Manual
 |
View all Uniden XC645 manuals
Add to My Manuals
Save this manual to your list of manuals |
Uniden XC645 manual content summary:
- Uniden XC645 | English Owners Manual - Page 1
CONTENTS Important Safety Instructions 2 Battery Safety Precautions 3 Introduction 4 Features 4 Included with the XC645 5 Important Electrical Considerations 6 Range 6 Telephone Line Problems 6 Radio Interference 7 More Than One Cordless Telephone 7 Installation 8 Selecting a Location 8 - Uniden XC645 | English Owners Manual - Page 2
and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from , do not disassemble this product. Take it to qualified service personnel when service or repair work is required. Opening or removing covers may - Uniden XC645 | English Owners Manual - Page 3
Caution: To reduce the risk of fire or injury to persons by the battery, read and follow these instructions: 1. Use only the appropriate type and size Battery Pack specified in this Operating Guide. 2. Do not dispose of the Battery Pack in a fire. The cell may explode. Check the Nickel-Cadmium - Uniden XC645 | English Owners Manual - Page 4
of the Uniden XC645 Cordless Telephone. These phones are designed Button • Base/Handset Volume Controls • Talk/Battery Low Indicator • 14 Day Battery Life AutoTalk™ allows you to answer a phone when the Handset is in the Base. To get the most from your phone, please read this Operating Guide - Uniden XC645 | English Owners Manual - Page 5
dprgtxtdtdsÌwwvrgfdehcwfddtwd`hgbtwgrsdw`ƒpdttdsgfcddt Operating Guide ® Long Telephone Cord Short Telephone Cord AC Adapter Rechargeable Battery Handset Base Unit Included with the XC645 If any of these items are missing or damaged, contact Uniden Customer Service at: (800) 297-1023, 8:00 - Uniden XC645 | English Owners Manual - Page 6
to such actions to allow you time for making necessary arrangements to continue uninterrupted service. If you are having trouble with your telephone service, you must first disconnect your phone to determine if it is the cause of your problem. If you determine that it is the cause, you must leave it - Uniden XC645 | English Owners Manual - Page 7
please check around your home to see what appliances may be causing the problem. In addition, we recommend that the Base not be plugged into a voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference. - Uniden XC645 | English Owners Manual - Page 8
to both a phone jack and continuous power plate. • If you decide to mount your phone on the wall, make sure to change the new phone for 15-20 hours before completing the phone outlets: Modular Jack Most phone equipment available now uses modular jacks. Phone wired directly to a phone jack, and these - Uniden XC645 | English Owners Manual - Page 9
or modifying telephone lines. Applying Power to the Base Unit All the XC645 phones require an AC outlet, without a switch to interrupt power, and the included AC Adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, connect the adapter as shown below. RING - Uniden XC645 | English Owners Manual - Page 10
Adapter Safety Feature The AC Adapter furnished with this phone may be equipped with a polarized line plug - a plug having one blade wider than the other. This plug will fit into the power outlet only one - Uniden XC645 | English Owners Manual - Page 11
2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 3. Plug the AC Adapter cord into the 9V DC input jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 4. Place the AC Adapter cord around the - Uniden XC645 | English Owners Manual - Page 12
5. Plug the other end of the cord into the telephone jack on the wall. 6. Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. 12 - Uniden XC645 | English Owners Manual - Page 13
Wall Installation Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug one end of the short telephone cord into the TEL LINE jack - Uniden XC645 | English Owners Manual - Page 14
3. Plug the AC Adapter into the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 4. Place the AC Adapter cord inside the molded channel. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE 5. Plug the telephone cord into the modular jack on the wall. Place the Base Unit on the - Uniden XC645 | English Owners Manual - Page 15
an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Direct Wall Mounting If you do not have a standard wall plate, you can mount your phone directly on a wall. Before mounting your phone, consider the following: • Select a location away from electrical - Uniden XC645 | English Owners Manual - Page 16
2. Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI TEL LINE 3. Place the cord inside the molded channel on the bottom of the Base Unit. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE 4. Plug the AC Adapter into the - Uniden XC645 | English Owners Manual - Page 17
5. Place the AC Adapter cord inside the molded channel. RING VOL PULSE-TONE DC IN 9V OFF-LO-HI + - TEL LINE 6. Place the Base Unit on the screws and push down until it's firmly seated. 7. Plug the other end of the telephone line cord into the wall jack. 17 - Uniden XC645 | English Owners Manual - Page 18
outlet. Note: Do not use an outlet controlled by a wall switch. Use only the Uniden AC Adapter supplied with this phone. Setting the Handset Retainer The Handset Retainer holds the Handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer - Uniden XC645 | English Owners Manual - Page 19
3. Put the retainer back into its slot on the Base Unit. 25 CHANNEL 4. Push down on the Handset Retainer until it snaps into place. 25 CHANNEL 19 - Uniden XC645 | English Owners Manual - Page 20
Setting Up Your Phone Extending the Antenna Before using your phone, be sure to raise the antenna to the vertical position. volume Installing the Handset Battery Pack 1. Press in on the Battery charge Cover Release. 20 - Uniden XC645 | English Owners Manual - Page 21
pack with its socket and plug it in. Note: The black lead will be on the left when the plug is properly aligned. 4. Place the battery pack inside the battery compartment, and slide the battery cover back on. Note: The built-in Memory Backup feature allows up to 3 minutes to disconnect the old - Uniden XC645 | English Owners Manual - Page 22
Cleaning the Battery Contacts To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about speaker 1 2 abc 3 def 4 ghi 5 jkl 6 mno 7 pqrs tone 8 tuv 0 oper mem pause redial 9 wxyz # flash page/find mute Extend"A"Phone Contacts D 22 - Uniden XC645 | English Owners Manual - Page 23
pack must be fully charged before using your phone for the first time. We recommend that the battery pack charge for approximately 15-20 hours, without interruption, before plugging the phone line into your new phone. 1. Place the Handset on the Base Unit. -or- Hang the Handset on the cradle when - Uniden XC645 | English Owners Manual - Page 24
Adapter is plugged in, and that the Handset is making good contact with the Base Unit charging contacts. 25 CHANNEL charge 1 4 ghi 7 pqrs mem Continuous Battery Charging For the best battery performance, return the Handset to the Base Unit at the end of the day. This keeps the - Uniden XC645 | English Owners Manual - Page 25
Low Battery Indicator When the Battery Pack in the Handset is very low and needs to be charged, the talk/batt low LED flashes. talk flash/rdl talk batt low 1 2 3 abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz If the talk/batt low LED begins to flash, the phone is programmed to limit its - Uniden XC645 | English Owners Manual - Page 26
is Tone or Pulse dialing. Adjusting Ringer/Volume Controls Handset Volume Controls To adjust the ringer volume of your Handset, press R when the phone is not in use. talk flash/rdl talk batt low 1 2 3 abc def 4 5 6 ghi jkl mno 7 8 pqrs tuv tone 0 D oper 9wxyz mem r.tone r.vol - Uniden XC645 | English Owners Manual - Page 27
You can also select one of two different ringer tones for the Handset. Press T to select a different ringer tone when the phone is not in use. To adjust the receiver volume, press V while you are on a call. 27 talk flash/rdl talk batt low 1 2 3 abc def 4 ghi 5 - Uniden XC645 | English Owners Manual - Page 28
Base Volume Controls To adjust the Base Unit ringer volume, move the RING VOL-OFF LO HI switch to the desired setting. RING VOL OFF-LO-HI To adjust the Base speaker volume, slide the VOLUME control to the desired setting. volume volume 28 - Uniden XC645 | English Owners Manual - Page 29
Digital Code Security To avoid unauthorized calls on your phone, a Digital Code feature was added to all XC645 phones. This Digital Code is shared only between the Handset and Base Unit. The Code is set automatically when you first use the phone. To change the Digital Code, be sure the Handset - Uniden XC645 | English Owners Manual - Page 30
3. Wait 5 seconds then place the Handset on the Base Unit. The charge LED will blink quickly, indicating that the Code has changed. If the Base Unit loses power while the Handset is off the Base, the Digital Code may be erased. When this happens, the Handset will not function. To reestablish - Uniden XC645 | English Owners Manual - Page 31
because most operations can be performed using either the Handset or the Base units. Making and Receiving Calls The following features of the XC645 phone are different depending on the Handset's location when you make or receive a call. ANSWER CALL MAKE CALL HANG UP REDIAL HANDSET ON BASE Pick - Uniden XC645 | English Owners Manual - Page 32
Changing Channels, Mute, Flash, and Page/Find To change channels or access call waiting while the phone is in use, or to use the one-way page to locate the Handset, follow these steps: CHANGING CHANNELS MUTE FLASH PAGE/FIND HANDSET Press C - Uniden XC645 | English Owners Manual - Page 33
most often in either place. Just remember that all programming functions must be completed when your phone is in the standby mode, since the programming keys do not function while you are on the phone. Storing a Number in Memory Handset Operaton Use these keys to store a number in memory with the - Uniden XC645 | English Owners Manual - Page 34
4. If a pause is needed during dialing to access a long distance service, press P . 9P 5551212 Note: The P button counts as one digit. Pressing P more than once increases the length of the pause between numbers. 5. Press M again . 6. Enter - Uniden XC645 | English Owners Manual - Page 35
9 wxyz # flash 2. Enter the number you want to store (up to 16 digits). 5551212 3. If a pause is needed during dialing to access a long distance service, press P. 9P5551212 Note: The P button counts as one digit. Pressing P more than once increases the length of the pause between numbers. 35 - Uniden XC645 | English Owners Manual - Page 36
4. Press M again. 5. Enter the memory location (0-9). A tone indicates that the number is stored. 36 - Uniden XC645 | English Owners Manual - Page 37
Storing a Mixed Number If your phone is set up for Pulse dialing, you can store a mixed mode number so that you can easily access long distance services. Handset Operation Use these keys to store a mixed mode number in memory with the Handset. Note: An error tone will sound and the programming - Uniden XC645 | English Owners Manual - Page 38
chan pause volume 5. Enter the number to be dialed in tone mode. 3300 6. If a pause is needed during dialing to access a long distance service, press P . P3300 Note: The P button counts as one digit. Pressing P more than once increases the length of the pause between numbers. 7. Press M again - Uniden XC645 | English Owners Manual - Page 39
Base Operation Use these keys to store a mixed mode number in memory with the Base Unit. Note: An error tone will sound and the programming procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step. 1. Press M . 1 2 abc 3 def 4 ghi 5 jkl 6 mno 7 pqrs tone - Uniden XC645 | English Owners Manual - Page 40
4. Enter the number to be dialed in tone mode. 3300 5. If a pause is needed during dialing to access a long distance service, press P. P3300 Note: The P button counts as one digit. Pressing P more than once increases the length of the pause between numbers. 6. Press M again. 7. Enter the - Uniden XC645 | English Owners Manual - Page 41
the memory location number (0-9) you want dialed. Chain Dialing On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. To do this, simply: 1. Store the access code into - Uniden XC645 | English Owners Manual - Page 42
Troubleshooting If your XC645 Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday. PROBLEM Charge light - Uniden XC645 | English Owners Manual - Page 43
Specifications General - The XC645 complies with FCC Parts 15 and 68. Frequency " (W) x 2 1 4 " (D) Approx. 15.7 oz. Handset Receive Frequency Transmit Frequency Power Requirements Size Weight Battery 43.72 to 46.97 MHz (25 Channels) 48.76 to 49.99 MHz (25 Channels) Rechargeable Ni-Cd - Uniden XC645 | English Owners Manual - Page 44
® XC645 Cordless Telephone UDZZ01397ZZ Operating Guide - Uniden XC645 | English Owners Manual - Page 45
Handset Controls and Keys 1. Antenna 2. Talk/Batt Low Indicator 3. Talk Button A 4. Numeric Keypad 5. Tone Button O 6. Memory Key M 7. Ringer Tone T/ Pause Key P 8. Microphone 9. Flash F /Redial F 10. Channel Select C 11. Ringer Volume R/ Volume V 1 2 talk flash/rdl 3 talk batt low 1 2 3 - Uniden XC645 | English Owners Manual - Page 46
ULTRACLEAR PLUS speaker 1 2 abc 3 def 4 ghi 5 jkl 6 mno 7 pqrs tone 8 tuv 0 oper 9 wxyz # mem pause redial flash page/find mute Extend"A"Phone 16 volume 9 11 13 15 10 12 14 1. Base Ringer Switch 2. Pulse/Tone Switch 3. DC Power Jack 4. Telephone Line Jack 5. Handset Retainer - Uniden XC645 | English Owners Manual - Page 47
equipment in any charger other than the one designed to charge this battery as specified in this Guide . Using another charger may damage the battery, or cause the battery to explode. RECHARGEABLE NICKEL-CADMIUM BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY Residents Of Minnesota should contact - Uniden XC645 | English Owners Manual - Page 48
than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operating Guide for this - Uniden XC645 | English Owners Manual - Page 49
Covered under one or more of the following U.S. patents: 4,511,761 4,595,795 4,797,916 4,523,058 ® ©1996 Uniden America Corporation. All rights reserved. Printed in China
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
 |
 |
CONTENTS
Important Safety Instructions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
Battery Safety Precautions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Features
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Included with the
XC645
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Important Electrical Considerations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Range
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Telephone Line Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Radio Interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
More Than One Cordless Telephone
. . . . . . . . . . . . . . . . . . . . . . . . .
7
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Selecting a Location
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Telephone Line Outlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Connecting the Telephone Cords
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Applying Power to the Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Adapter Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Desk or Tabletop Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Wall Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Direct Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
Extending the Antenna
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20
Installing the Handset Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . .
20
Cleaning the Battery Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
Charging the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
Low Battery Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
25
Setting the Pulse/Tone Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
Adjusting Ringer/Volume Controls. . . . . . . . . . . . . . . . . . . . . . . . . . .
26
Automatic Digital Code Security
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
Using Your Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
Making and Receiving Calls
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
31
Changing Channels, Mute, Flash, and Page/Find . . . . . . . . . . . . . . .
32
Programming Your Phone
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
Storing a Number in Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33
Storing a Mixed Number
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
37
Dialing a Stored Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
Chain Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
Erasing a Stored Number
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
43
1