Vantec NST-225MX-S3 User Guide - Page 8
Hard Drive Formatting Guide
View all Vantec NST-225MX-S3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NST-225MX-S3 2.5" Dual SATA 6 Gb/s to USB 3.0 HDD/SSD RAID 7. This Step will set the RAID mode. Connect the power cable to the enclosure and the ac adapter to your power outlet. While pressing the reset button, turn ON the power switch and continue to hold the reset button for another 10-15 seconds while the drive spin up and set the mode change. After 15 seconds later, you can release the reset button and the mode change is done. The Green HDD LED will continue to flash and the Red Power LED will be ON. You can now turn off the unit and continue with the next step. 8. Slide the cover back on to the Tray and secure using the 4 Screws. 9. You can now start using your enclosure. If you need to initialize, partition and format the drive, please refer to Chapter on Hard Drive Formatting Guide. 8