ViewSonic PJ750 Service Manual - Page 21
case.Option
View all ViewSonic PJ750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
• Before Replacing the LCD I Lens Prism You should not replace separately the parts of the liquid crystal LCD / Lens Prism because it works properly only when used together. Therefore, regarding these parts, you can either replace part , LCD / Lens Prism Ass'y, or send the whole unit LCD / Lens Prism Ass'y back to SUPPLIER, where we will replace the malfunctioning part, recondition the device and send it back to you. In that case please contact our distributor. DISTRIBUTOR .4> • Do not disassemble the unit because replacement of separate parts is not possible. • For repairs of the product, please contact our distributor. SUPPLIER G Panel Return Replacement of G Panel -> Reconditioning • Air Filter Maintenance The air filter should be cleaned as described below at intervals of approximately 100 hours. 1. Switch the projector power supply OFF, and remove the power cord from the power outlet. 2. Clean the air filter with a vacuum cleaner. • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate "SAFETY INSTRUCTIONS" thoroughly to ensure that maintenance is performed correctly. • Replace the air filter if contamination cannot be removed, or if it is damaged. Contact your dealer in such case.(Option Air filter assembly : MU01421) • Do not use the equipment with the air filter removed. •When the air filter is clogged with dust etc. the CHECK AIR FLOW message appears on the screen and the power supply is switched OFF automatically to prevent the temperature rising inside the projector. ViewSonic Corporation 18 CONFIDENTIAL -- DO NOT COPY PJ750