ViewSonic PJ750 Service Manual - Page 9
coordinates
View all ViewSonic PJ750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
4-4 PSIG G adjustment (vertical stripe adjustment) Signals for internal adjustment Adjustment procedure 1. Make this adjustment after completing the adjustment in 4-3 Flicker adjustment. 2. Use DAC-P - PSIG - G: in the Adjust menu to adjust so that the vertical lines spaced every 6 dots are as inconspicuous as possible. 4-5 White balance adjustment 1. Perform these adjustments after the PSIG adjustment described in Section 4-4. 2. First, adjust the G color. 3. Place the cursor on Slide Show in the Adjust menu [A/D], press the [Pod key three times to display G monochrome and adjust the illuminance at the center of the screen. Make a note of the setting (here assumed to be A [Ix]). Press the MENU key to return. 4. Adjust Gamma 86% and G: in the Adjust menu so that illuminance (Y) at the center of the screen is adjusted as follows. Y= Ax 0.712 ± 40 [Ix] 5. Adjust Gamma, 43% and G: in the Adjust menu so that illuminance (Y) at the center of the screen is adjusted as follows. Y= Ax 0.155 ± 15 [Ix] 6. Adjust Gamma, 29% and G: in the Adjust menu so that illuminance (Y) at the center of the screen are adjusted as follows. Y = A x 0.064 ± 5 [Ix] 7. Adjust Gamma, 14% and G: in the Adjust menu so that illuminance (Y) at the center of the screen is adjusted as follows. Y = A x 0.014 ± 1 [Ix] 8. Set the adjust value to 0. 9. Now, adjust the R and B colors. 10.Place the cursor on [A/D] - [SLIDE SHOW] in the ADJUST menu and press the [OH key once to display a white screen. Then measure the color coordinates at the center of the screen and take a note of the setting (here assumed to be x1, y1). Press the [MENU] key to return. 11.Adjust Gamma, 86%, R: and B: so that the color coordinates (x, y) at the center of the screen take on the following values. x = (x1 - 0.005) ± 0.003 y = (y1 - 0.010) ± 0.005 12.Adjust Gamma, 43%, R: and B: so that the color coordinates (x, y) at the center of the screen take on the following values. x = (x1 - 0.005) ± 0.003 y = (y1 - 0.015) ± 0.005 13.Adjust Gamma, 29%, R: and B: so that the color coordinates (x, y) at the center of the screen take on the following values. x = (x1 - 0.010) ± 0.003 y = (y1 - 0.020) ± 0.005 14.Adjust Gamma, 14%, R: and B: so that the color coordinates (x, y) at the center of the screen take on the following values. x = (x1 - 0.010) ± 0.003 y = (y1 - 0.025) ± 0.005 ViewSonic Corporation 6 CONFIDENTIAL -- DO NOT COPY PJ750