ViewSonic PJ870 Service Manual - Page 71
Power, Specification
UPC - 766907376319
View all ViewSonic PJ870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
P J870 (/) 7-3 DC-DC Power Specification z 7-3.1 DC-DC Power Requirements Description General : Efficiency, Overall, Min. Load, Nominal Load Variation, Max. Output Voltage Variation, No Load Operation Start Cycle Time, Max. Start Sequencing Start Period, All Voltages Input Input Requirements Output : Standby Output Power Over Voltage Protection, Limit Points RctlailkWat Ment. 85% Input voltage is 392Vdc with max. load 90% of Max. For each individual DC output voltage DC-DC output voltage shall meet all 10% requirements while the load is within measured from 90% (expected typical) of max. load. The DC ouput vltages shall not exceed this tolerance under no load conditions. No part of 6% the IPS subsystem shall be damaged. Nor shall over voltage protection circuitry activate, as a result of no load operation. 0.5 Seconds All operation voltage available. No order All voltages shall monotonically arrive within specification limits, and remain. All voltages, first to last, shall monotonically 50 milliseconds arrive within specification limits, and remain within specification limits. Within this period. 400Vdc ± 8Vdc Output of AC-DC converter (PFC) None No DC output standby power voltage is required, expected fan voltage. Refer to 7-3.2 Over voltage protection limits may exceed the recommended operating limits of the projector electroniccs and may affect reliability of those electronics if applied for an extended period of time. Additionally, the over voltage protection electronics shal utilize circuitry that will fail in the short circuit, rather than open circuit mode. ViewSonic Corporation 7-11 ] : Confidential - Do Not Copy