ViewSonic PJ870 Service Manual - Page 79
Inspection, Procedure
UPC - 766907376319
View all ViewSonic PJ870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
1VIINVIAT aDIMHS P7870 8-4 Inspection Procedure 1) Hi-Pot Test: Hi-Pot Specification : 1.5KVAC, 10mA, 2 second. 2) Noise Test: Incline 30° to the left and right to check whether there is strange noise. 3) Function Test I : (a). Connect PC, Video, S-Vi deo, Audio signal and extension speaker with PJ870. (b). Press source button to switch to PC signal. + Make sure the image is normal. (c). Press Pip button on the remote controller. 4. Make sure the video signal appears on PC signal. (d). Press Pip button to cancel Pip function. (e). Press source button to switch to Video signal. + Make sure the image is normal. (f). Press source button to switch to S-Video signal. + Make sure the image is normal. (g). Press Menu button for 4 times to enter Audio Function OSD. + Select Volume function and make sure the function works normally. 4. Select Mute function and make sure the function works normally. + Select Stereo/Mono function and make sure the function works normally. (h). Disconnect the extension speaker. + Make sure the internal speaker works normally. 4) Function Test II : (a). Connect PC signal with PJ870. *7 Fine Line Morie Pattern : - Make sure the noise can be eliminated by Tracking function. - If there is line bar appearing, make sure it can be eliminated by Frequency function. ViewSonic Corporation [ 8-5 ] Confidential - Do Not Copy