ViewSonic PJD5553LWS PJD5553Lws User Guide English - Page 35
Optimizing the image, Selecting a picture mode
View all ViewSonic PJD5553LWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
5. Wide (PJD5553LWS): Scales a 4:3 aspect image vertically and horizontally in a non-linear manner so that it fills the screen with a 16:10 aspect ratio. 4:3 picture 6. Panorama (PJD5353LS): Scales a 4:3 image vertically and horizontally in a non-linear manner so that it fills the screen.. 4:3 picture 7. 2.35:1: Scales an image so that it is displayed in the center of the screen with a 2.35:1 aspect ratio without aspect alteration. 2.35:1 picture 8. Anamorphic: Scales a 2.35:1 aspect image so that it fills the screen. 2.35:1 picture Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type. To select an operation mode that suits your need, you can follow one of the following steps. • Press Color Mode repeatedly until your desired mode is selected. • Go to the PICTURE > Color Mode menu and press / to select a desired mode. Picture modes for different types of signals The picture modes available for different types of signals are listed below. 1. Brightest mode: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms. 2. Dynamic mode: Is designed for presentations under daylight environment to match PC and notebook coloring. In addition, the projector will optimize the image quality using the dynamic PC function in accordance with the projected contents. 28