ViewSonic PJD5553LWS PJD5553Lws User Guide English - Page 55

Lamp information, Getting to know the lamp hour, Extending lamp life

Get ViewSonic PJD5553LWS PDF manuals and user guides View all ViewSonic PJD5553LWS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

8. Highlight Reset and press Enter. The lamp time will be reset to '0'. CAUTION Remember to set Filter Mode to Off in the SYSTEM SETTING: ADVANCED > Filter Settings menu when using the projector with the dust filter removed. Setting Filter Mode to Off does not reset the filter timer. The timer will continue counting the next time you fit the filter back on and set Filter Mode to On. Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. To obtain the lamp hour information: 1. Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Lamp Settings menu. 2. Press Enter and the Lamp Settings page is displayed. 3. You will see the Lamp Hours information on the menu. 4. To leave the menu, press Exit. You can also get the lamp hour information on the INFORMATION menu. Extending lamp life The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings via the OSD menu. Setting Lamp Mode as Economic Using Economic mode reduces system noise and power consumption by 20%. If the Economic mode is selected, the light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go to the SYSTEM SETTING: ADVANCED > Lamp Settings > Lamp Mode menu and press / to select Economic. Setting Power Saving The projector lowers the power consumption if no input source is detected after 5 minutes to prevent unnecessary waste of lamp life. You can further decide if you would like the projector to turn off automatically after a set period of time. 1. Open the OSD menu and go to the SOURCE > Auto Power Off menu. 2. Press Enter and the Auto Power Off page is displayed. 3. Highlight Power Saving and press / . 4. When Disable is selected, the projector power will be reduced to 30% after no signal is detected for 5 minutes. If you select 10 min, 20 min or 30 min, the projector power will be reduced to 30% after no signal is detected for 5 minutes. And when 10 min, 20 min or 30 min is up, the projector will turn off automatically. Setting Sleep Timer This function allows the projector to turn off automatically after a set period of time to prevent unnecessary waste of lamp life. 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
48
8.
Highlight
Reset
and press
Enter
. The lamp time will be reset to '0'.
CAUTION
Remember to set Filter Mode to Off in the SYSTEM SETTING: ADVANCED > Filter Settings
menu when using the projector with the dust filter removed. Setting Filter Mode to Off does
not reset the filter timer. The timer will continue counting the next time you fit the filter back on
and set Filter Mode to On.
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically
calculated by the built-in timer.
To obtain the lamp hour information:
1.
Open the OSD menu and go to the
SYSTEM SETTING: ADVANCED >
Lamp Settings
menu.
2.
Press
Enter
and the
Lamp Settings
page is displayed.
3.
You will see the
Lamp Hours
information on the menu.
4.
To leave the menu, press
Exit
.
You can also get the lamp hour information on the
INFORMATION
menu.
Extending lamp life
The projection lamp is a consumable item. To keep the lamp life as long as possible, you
can do the following settings via the OSD menu.
Setting Lamp Mode as Economic
Using
Economic
mode reduces system noise and power consumption by 20%. If the
Economic
mode is selected, the light output will be reduced and result in darker projected
pictures.
Setting the projector in
Economic
mode also extends the lamp operation life. To set
Economic
mode, go to the
SYSTEM SETTING: ADVANCED > Lamp Settings
>
Lamp Mode
menu and press
/
to select
Economic
.
Setting Power Saving
T
he projector lowers the power consumption if no input source is detected after 5 minutes to
prevent unnecessary waste of lamp life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
1.
Open the OSD menu and go to the
SOURCE
>
Auto Power Off
menu
.
2.
Press
Enter
and the
Auto Power Off
page is displayed.
3.
Highlight
Power Saving
and press
/
.
4.
When
Disable
is selected, the projector power will be reduced to 30% after no signal
is detected for 5 minutes.
If you select
10 min
,
20 min
or
30 min
, the projector power will be reduced to 30%
after no signal is detected for 5 minutes. And when
10 min
,
20 min
or
30 min
is up,
the projector will turn off automatically.
Setting Sleep Timer
This function allows the projector to turn off automatically after a set period of time to
prevent unnecessary waste of lamp life.