ViewSonic PJD6223 PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English)
ViewSonic PJD6223 Manual
View all ViewSonic PJD6223 manuals
Add to My Manuals
Save this manual to your list of manuals |
ViewSonic PJD6223 manual content summary:
- ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 1
PJD5126/PJD6223/PJD6253/ PJD6553w DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 2
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 3
any ventilation openings. Install the unit in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 4
under the Annex of the RoHS Directives as noted below: Examples of exempted components are: 1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive. 2. Lead in glass of cathode ray tubes, electronic components - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 5
XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic PJD6223/PJD6253/PJD6553w ViewSonic DLP Projector VS14295/VS14191/VS14193/VS14195 PJD5126/PJD6223/PJD6253/PJD6553w_UG_ENG Rev. 1B 10-03-11 Product disposal at end of product life The lamp - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 6
in standby mode. 46 Shutting down the projector 46 Menu operation 47 Maintenance 55 Care of the projector 55 Lamp information 56 Troubleshooting 62 Specifications 63 Projector specifications 63 Dimensions 65 Ceiling mount installation 65 Timing chart 66 Copyright information...68 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 7
the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 8
transporting or installation. It should be used with a commercially available theft prevention cable. Safety instructions for ceiling mounting of the projector We want you to have a pleasant experience using your projector, so we need to bring this safety matter to your attention to prevent damage - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 9
• Smart Eco function decreasing the power consumption of the lamp by up to 70% when no input signal can be detected for a set period of time. • Presentation timer for better control of time during presentations • Support 3D DLP Link • Color management allowing color adjustments to your liking - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 10
suitable for your region, and may differ from those illustrated. Projector Power Cord VGA Cable PJD5126/PJD6223 PJD6253/PJD6553w Multi-language user manual DVD Optional accessories 1. Replacement lamp 2. Soft carry case 3. VGA-Component adapter Quick Start Guide Remote Control & Batteries 5 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 11
. 14. 15. 16. 17. 18. 18 19. 20. 21. 22 22. External control panel (See "Projector" on page 7 for details.) Lamp cover Vent (heated air exhaust) Quick-release button Lens cover Focus and Zoom ring Front IR remote sensor Projection lens Type B USB port RJ45 LAN input port RS-232 control port HDMI - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 12
the lamp has developed a 5. POWER indicator light problem. Lights up or flashes when the projector is 11. AUTO under operation. Automatically determines the best picture II POWER Toggles the projector between standby mode and on. 6. SOURCE Displays the source selection bar. 7. Top IR remote - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 13
remote mouse control" on page 10 for details. 5. // / Selects the desired menu items and makes adjustments. 6. Enter/ 1. II POWER Enacts the selected On-Screen Display Toggles the projector Keystone keys ( / ) Allows user to define a short cut key on the remote control, and the function item - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 14
. Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote control prior to using it. Remote control code The projector can be assigned to two different remote control codes, A or B. When several adjacent - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 15
mode, press Mouse again or other keys except for the mouse related multi-function keys. Remote control effective range Infra-Red (IR) remote control sensors are located on the front and the top of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 16
1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 17
the screen. Purchase the projector ceiling mount kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn the projector on. 3. Rear Ceiling Select this location with the projector suspended upside-down from the - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 18
Refer to "Dimensions" on page 65 for the center of lens dimensions of this projector before calculating the appropriate position. The "screen" mentioned below refers to the projection screen usually consisting of a surface and a support structure PJD5126/PJD6223/PJD6253 • 4:3 image on a 4:3 screen - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 19
PJD6253 (a) Screen Size [inch (m)] 4:3 image on a 4:3 Screen (b) Projection (c) Image (d) Vertical distance [m (inch)] height offset min. max. [cm (inch)] [cm (inch)] 16:9 image on a 4:3 Screen (b) Projection distance (c) Image (d) Vertical [m (inch)] height offset min. max. [cm (inch - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 20
physically test the projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location. 15 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 21
vary with each projector model. • For detailed connection methods, see pages 17-20. Notebook or desktop computer Monitor A/V device (VGA) or (DVI) 1 2 3 17 8 4 756 Speakers 7 PJD6223/PJD6253/ PJD6553w TYPE B USB LAN RS-232 HDMI MONITOR OUT COMPUTER IN 1 S-Viseo Video Audio - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 22
the projector. 3. If you wish to use the remote paging view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT signal output socket on the projector to an external monitor with a VGA cable following the instructions below: To connect the projector - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 23
is equipped with a HDMI socket, you can enjoy uncompressed digital video quality. See "Connecting an HDMI device" on page 19 for how to connect the projector to a HDMI source device and other details. If no HDMI source is available, the next best video signal is Component video (not to be confused - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 24
projector. The audio output is a mixed mono signal and controlled by the projector projector. • In the unlikely event that you connect the projector to a DVD player via the projector • The projector is only PJD6223/ connect the projector to a on the projector. • The projector is only the projector is - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 25
the composite Video output socket of the Video source device. 2. Connect the other end of the Video cable to the VIDEO socket on the projector. • The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See "Connecting audio" on page 18 for details. • If - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 26
is closed, it could become deformed due to the heat produced by the projection lamp. 3. Press II POWER on the projector or remote control to start the projector. The POWER indicator light stays blue when the projector is on. (If necessary) Rotate the focus ring to adjust the image clearness. • If - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 27
a valid signal, the message 'No Signal' will continue to be displayed until an input signal is found. You can also press SOURCE on the projector or remote control to select your desired input signal. See "Switching input signal" on page 27 for details. If the frequency/resolution of the input signal - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 28
input signal Screen Color Aspect Ratio Keystone Position Phase H. Size Zoom 3D Sync 3D Sync Invert Color Management Analog RGB Off Auto ENTER 16 0 Status Disable Disable Off Disable ViewSonic On MENU Exit 4. Press MENU/EXIT twice* on the projector or Exit on the remote control to leave and - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 29
on the remote control. • Once a password has been set, the projector cannot be used unless the correct password is entered every time the projector is started. • The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 30
is started. 7. To leave the OSD menu, press MENU/EXIT on the projector or Exit on the remote control. The digits being input will be displayed as asterisks on-screen. Write your selected password down here in this user manual in advance or right after the password is entered so that it is available - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 31
is displayed lasting for three seconds, and the message 'INPUT PASSWORD' is displayed for your retry. You can press MENU/EXIT on the projector or Exit on the remote control to cancel the change or try another password. Though the password function is disabled, you need to keep the old password in - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 32
projector to automatically search for the signals. You can also manually select the desired signal by pressing one of the source selection keys on the remote the PJD6223/ PJD6253/PJD6553w series. Video In the unlikely event that you connect the projector to a DVD player via the projector's HDMI - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 33
projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 29 for details. • Do not look into the lens while the lamp is on. The strong light from the lamp on the projector or Auto Sync on the remote control. - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 34
to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction page. Press to correct keystoning at the - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 35
the paning mode and press the directional arrows ( , , , ) to navigate the picture. 4. To reduce size of the picture, press MODE/ENTER on the projector or Enter on the remote control to switch back to the zoom in/out functionality, and press AUTO/Auto Sync to restore the picture to its original size - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 36
and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want to 16:10 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 37
Press MODE/ENTER on the projector or Color Mode on the remote control repeatedly until your viewing in a blackened (little light) environment. In addition, the projector User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 38
for enjoying dark movies or DVD movies best viewed in a blackened (little light) home cinema or lounge room environment. the picture modes (except the User 1/User 2) as a starting point and customize the settings. 1. Press MENU/EXIT on the projector or Menu on the remote control to open the OnScreen - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 39
previously adjusted the Brightness setting to suit your selected input and viewing environment. -30 0 +30 Adjusting Color Highlight the PICTURE tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 40
it. Color Management Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters and highlight Color Management. 2. Press MODE/ENTER on the projector or Enter on the remote control and the Color Management page is displayed. 3. Highlight - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 41
, press and press / to highlight Start Counting and press MODE/ENTER. 8. A confirmation message displays. Highlight Yes and press MODE/ENTER on the projector or remote control to confirm. You will see the message "Timer is On" displaying on the screen. The timer starts counting when the timer is on - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 42
being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except II POWER. 1. Press on the projector or Lock on the remote control, or go to the SYSTEM SETUP: Basic > Panel Key Lock menu, and select On by pressing / on the - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 43
image. The word 'FREEZE' will be displayed in the upper left corner of the screen. To release the function, press any key on the projector or remote control. Even if an image is frozen on the screen, the pictures are running on the video or other device. If the connected devices have - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 44
available for the PJD6223/PJD6253/PJD6553w series. In addition to selecting the projector preset startup screen from among ViewSonic logo, Black or of the steps are as follows. 1. Press MENU/EXIT on the projector or Menu on the remote control and then press / until the SYSTEM SETUP: Basic menu is - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 45
PJD6223/PJD6253/PJD6553w series. The projector supports Crestron® software. With correct settings for the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and the projector MODE/ENTER on the projector or Enter on the remote control. The LAN - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 46
select the item you want to modify and press MODE/ENTER on the projector or Enter on the remote control. 5. Press / to move the cursor and the press / screen shots in this manual are for reference only, and may differ from the actual design. 1. Enter the address of the projector in the address bar - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 47
same network. For the Details of AMX Device Discovery, visit the AMX web site at http://www.amx.com/. 4. If your projector is connected to a network which supports Simple Mail Transfer Protocol (SMTP), you can configure it to alert you via email on significant events. 5. The Crestron (e-Control - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 48
Alert Condition To Cc Subject From Server User Name Password Fan Error Lamp Error Over Temperature Lamp Time Alert Submit Issue Test Mail 40 varies according to the connectors available on the projector. • When you use the projector control panel or remote control to change the OSD menu settings, - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 49
settings and secure access of remote network operation on this projector. i ii iv iii v vi i. This section is only used with the Crestron Control System. Please contact Creston or refer to its user manual for setup information. ii. You can name the projector, keep track of its location - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 50
(or hostname) as shown on the projector's on-screen display (OSD) menu, and "02" for IPID, "41794" for the reserved Crestron control port. About Crestron RoomView™ setting and command method, please access below website to get RoomView™ User Guide and more information: http://www.crestron.com - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 51
SNMP, AMX and Xpanel formats supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details, please follow its user guide or website respectively to control and manage projectors. Using the projector in standby mode Some of the projector functions are available in standby - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 52
only) Position Phase H. Size Zoom 3D Sync TI 3D DLP Link/Off 3D Sync Invert Disable/Invert Primary Color R/G/B/C/M/Y Color Management Hue Saturation Gain Color Mode PC source: Brightest/PC/ViewMatch/Movie/ Dynamic PC/Dynamic Movie/User 1/User 2 Video source: Brightest/Gaming/ViewMatch - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 53
/5 min/10 min/15 min/30 min Smart Restart 3. SOURCE PJD5126: Off/On Off/On Pattern PJD6223/PJD6253: 01/02/03/04/05 PJD6553w: 01/02/03/04 Projection (Projector Position)/3D Sync/Lamp My Button Mode/DCR/Closed Caption/Auto Off (Auto Power Off)/Message/Screen Color/Splash Screen/ Information - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 54
/Off Start Counting/Off Security Settings Change Password Power On Lock On/Off Remote Control Code A/B Reset All Settings On/Off 6. INFORMATION Current System Status • Source • Color Mode • Resolution • Color System • Equivalent Lamp Hour • MAC Address (PJD6223/ PJD6253/PJD6553w only) 49 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 55
to wear a pair of 3D glasses to view the 3D images. • TI 3D DLP Link: Enables projector for TI 3D DLP Link. • Off: Disables 3D. 3D Sync Invert When the 3D Sync function is on: enable this function to correct the problem. (For TI 3D DLP Link only) Color Management See "Color Management" on page 35 for details - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 56
It takes the projector 4 minutes after it is turned on or resumed to initiate the function. The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. My Button Sets a hotkey on remote control. 3. SOURCE - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 57
" on page 23 for details. The projector can be installed on a ceiling or behind a screen, or with one or key functions except II POWER on the projector and keys on the remote control. See "Locking control keys" on function and the projector will automatically switch the lamp mode between normal and - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 58
menu Function Audio Settings Menu Settings Closed Caption Lamp Settings Presentation Timer Description The sound adjustments made as below will have an effect on the projector speaker. Be sure you have made a correct connection to the projector audio input/output jacks. See "Connection" on page - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 59
" on page 24 for details. Remote Control Code See "Remote control code" on page 9 for details. Reset All Settings Returns all settings to the factory preset values. The following settings will still remain: Phase, H. Size, User 1, User 2, Language, Projector Position, High Altitude Mode, Security - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 60
the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications" on page 63 or consult your dealer about the range. • Retract the adjuster feet. • Remove the battery from the remote control - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 61
menu. 4. To leave the menu, press MENU/EXIT on the projector or Exit on the remote control. You can also get the lamp hour information on the INFORMATION menu. Extending lamp life The projection lamp is a consumable item. To keep the lamp life as long as possible, you can do the following settings - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 62
beforehand, it must be replaced when you see this message. The lamp MUST be replaced before the projector will operate normally. Notice Replace Lamp Now Lamp > ____ Hours Lamp usage time exceeded OK Notice Lamp usage time exceeded Replace lamp (refer to User Manual) Then reset lamp timer OK 57 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 63
of sharp edges in the lamp compartment. Wash hands after lamp replacement. • Only ViewSonic certified lamps are tested with this projector. Use of other lamps may cause electrical shock and fire. 1. Turn the power off and disconnect the projector from the wall socket. If the lamp is hot, avoid burns - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 64
in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 7. Insert the - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 65
A warning message is displayed asking if you want to reset the lamp timer. 17. Highlight Reset and press MODE/ENTER on the projector or ENTER on the remote control. The lamp time will be reset to '0'. CAUTION Do not reset if the lamp is not new or replaced as this could cause damage. Notice Reset - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 66
Off Red Red Red Red Red Red Red Red Red Green Power events Off Stand-by mode Off Powering up Off Normal operation Lamp events The projector has shut down automatically. If you try to reRed start the projector, it will shut down again. Please contact your dealer for assistance. Red 1. The - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 67
Troubleshooting The projector does not turn on. Cause There is no power from the power cord. Attempting to turn the projector on again during the cooling process. Remedy Plug the power cord into the AC inlet on the projector projector if necessary. Open the lens cover. Remote control does not - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 68
to change without notice. General Product name Model name DLP Projector PJD5126 PJD6223 PJD6253 PJD6553w Optical Resolution Display system Lamp 800 x 600 SVGA 1-CHIP DMD 180 W lamp 1024 x 768 XGA 1280 x 800 WXGA 240 W lamp Electrical Power supply Power consumption AC100-240V, 2.9 A, 50 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 69
Environmental Requirements Product name Model name Operating temperature Operating relative humidity Operating altitude DLP Projector PJD5126 PJD6223 0°C-40°C at sea level PJD6253 PJD6553w 10%-90% (without condensation) • 0-1499 m at 0°C-35°C • 1500-3000 m at 0°C-30°C (with High Altitude - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 70
Dimensions 293.94 mm (W) x 84 mm (H) x 242 mm (D) ZOOM MENU EXIT SOURCE MTEEOMPNDTEER LMMP AU TO 242 84 293.94 Ceiling mount installation 160 137 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 115 80 Unit: mm 65 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 71
Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1400 x 1050 1600 x 1200 640 x 480@ - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 72
Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 480p .00 60 50 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 73
optical, chemical, manual or otherwise, without the prior written permission of ViewSonic Corporation. Disclaimer ViewSonic Corporation makes no without obligation to notify any person of such revision or changes. *DLP and Digital Micromirror Device (DMD) are trademarks of Texas Instruments. - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 74
Volume - NEC 83 F4 83 7C PgUp NEC 83 F4 06 F9 PgDn NEC 83 F4 05 FA Info NEC 83 F4 97 68 PJD5126/PJD6223 PJD6253/PJD6553w 69 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 75
Volume - NEC 83 F4 5B A4 PgUp NEC 83 F4 5D A2 PgDn NEC 83 F4 5C A3 Info NEC 83 F4 5F A0 PJD5126/PJD6223 PJD6253/PJD6553w 70 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 76
0x14 0x00 0x03 0x00 0x00 0x00 0x01 0x18 = On Ex2. Read brightness: 0x05 0x14 0x00 0x04 0x00 0x00 0x00 0x32 0x00 0x4A = 50 Ex3. Read lamp hours: 0x05 0x14 0x00 0x06 0x00 0x00 0x00 0x28 0x00 0x00 0x00 0x42 = 40 • The RJ45 commands can only be received via TCP port 4661 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 77
Reset Splash Screen Quick Cooling High Altitude Mode Lamp Mode Message Execute Write Read Write Read Write Read Write Read Write Read Splash Screen Black Splash Screen Blue Splash Screen ViewSonic Splash Screen Screen Capture Splash Screen Off Splash Screen status Quick Cooling Off Quick Cooling - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 78
Brightness Write Read Write Read Write Read Write Read Write Front Table Rear Table Rear Ceiling Front Ceiling projector position status OFF TI 3D DLP Link 3D Sync Status Off On 3D Sync Invert Status Contrast decrease Contrast increase Contrast ratio Brightness decrease Brightness increase Read - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 79
Horizontal position Write Read Vertical position Write Read Color temperature Write Read Blank Write Read KeystoneVertical Write Read Horizontal position shift right Horizontal position shift left Horizontal position Vertical position shift up Vertical position shift down read Vertical - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 80
Color mode Primary Color Hue Saturation Write Read Write Read Write Read Write Read Brightest Movie User 1 User 2 PC / Gaming ViewMatch Dynamic PC Dynamic Movie Preset mode status Primary color R Primary color G Primary color B Primary color C Primary color M Primary color Y Primary color status - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 81
Gain Freeze Source input Quick Auto Search Mute Write Read Write Read Write Read Write Read Write Read Gain decrease Gain increase Gain Freeze on Freeze off Freeze status Input source VGA Input source VGA2 Input source Composite Input source SVIDEO Input source LAN Input source USB A Input source - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 82
Error status Write Read Write Read Write Read Read Increse Volume Decrese Volume Volume Language Reset Lamp usuage hour Lamp usuage hour Read error status 0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x01 0x00 0x61 0x06 0x14 0x00 0x04 0x00 0x34 0x14 0x02 0x00 0x62 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 83
.viewsoniceurope.com/uk/support/call-desk/ T (Toll-Free)= 1-800-688-6688 T (Toll)= 1-424-233-2530 F= 1-909-468-3757 [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] 7180 - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 84
ViewSonic office for the warranty information. Lamp warranty subject to terms and conditions, verification and approval. Applies to manufacturer's installed lamp only. All accessory lamps product modification, or failure to follow instructions supplied with the product. b. Operation outside - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 85
contact ViewSonic Customer Support (please refer to "Customer Support" page). You will need to provide your product's serial number. 2. To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 86
or failure to follow instructions supplied with the product to support your sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 2. Take or ship the product in the original container packaging to an authorized ViewSonic service - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 87
for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com - ViewSonic PJD6223 | PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 88
PJD5126/PJD6223/PJD6253/
PJD6553w
DLP Projector
User Guide
Model No. VS14295/VS14191/VS14193/VS14195
IMPORTANT:
Please read this User Guide to obtain important information on installing
and using your product in a safe manner, as well as registering your product for future
service.
Warranty information contained in this User Guide will describe your limited
coverage from ViewSonic Corporation, which is also found on our web site at http://www.
viewsonic.com in English, or in specific languages using the Regional selection box in
the upper right corner of our website.
“Antes de operar su equipo lea cu idadosamente
las instrucciones en este manual”