ViewSonic PJD6223 PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 56
Quick Auto, Color Mode
View all ViewSonic PJD6223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2. PICTURE menu Function Color Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Description Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 32 for details. Selects a picture mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 33 for details. Adjusts the brightness of the image. See "Adjusting Brightness" on page 34 for details. Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 34 for details. Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 34 for details. Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 34 for details. The function is only available when Video or S-Video with NTSC system is selected. Adjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 34 for details. Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 34 for details. Color Temperature See "Selecting a Color Temperature" on page 34 for details. Save Settings Saves the settings made for the User 1 or User 2 mode. Quick Auto Search See "Switching input signal" on page 27 for details. Color Space Conversion See "Changing Color Space" on page 27 for details. Smart Eco Timer Smart Restart Pattern Allows the projector to decrease the power consumption automatically if no input signal is detected after a set period of time. It takes the projector 4 minutes after it is turned on or resumed to initiate the function. Selecting On enables you to restart the projector immediately within 150 seconds after turning it off. It takes the projector 4 minutes after it is turned on or resumed to initiate the function. The projector can display several test patterns. It helps you adjust the image size and focus and check that the projected image is free from distortion. My Button Sets a hotkey on remote control. 3. SOURCE menu 51