ViewSonic PJD6223 PJD5126, PJD6223, PJD6253, PJD6553W User Guide (English) - Page 51
Using the projector in standby mode, Shutting down the projector, PJLink™, SNMP
View all ViewSonic PJD6223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
PJLink™, SNMP, AMX and Xpanel formats supported This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details, please follow its user guide or website respectively to control and manage projectors. Using the projector in standby mode Some of the projector functions are available in standby mode (plugged in but not turned on). To use these functions, be sure you have turned on the corresponding menus under SYSTEM SETUP: Basic > Standby Settings, and the cable connections are correctly made. For the connection methods, see the Connection chapter. Power Saving Less than 1W power consumption when Power Saving mode is turned on. When Power Saving is On, the following settings are not available. Active VGA Out Selecting On outputs a VGA signal when the COMPUTER IN 1 and COMPUTER OUT sockets are correctly connected to devices. The projector outputs the signal received only from COMPUTER IN 1. Active Audio Out Selecting On outputs an audio signal when the AUDIO IN 1 and AUDIO OUT sockets are correctly connected to devices. The projector outputs the audio signal received only from AUDIO IN 1. Shutting down the projector 1. Press II POWER and a confirmation message is displayed prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press II POWER a second time. 3. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time. CAUTION • To protect the lamp, the projector will not respond to any commands during the cooling process. • Do not unplug the power cord before the projector shutdown sequence is complete. ZOOM MENU EXIT SOURCE MTEEOMPNDTEER LMMP AU TO MENU EXIT SOURCE MTEEOMPNDTEER LMMP AU TO 46