Viking RVER3301 Installation Instructions - Page 23
Final Installation
![]() |
View all Viking RVER3301 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Final Installation 1 2 Connect electrical in shaded area. See the "Electrical Requirements" section for more information. 3 Slide range into place. Be sure anti-tip bracket slides into the anit-tip opening. (03.9/58"cm) Check that unit is level side to side and front to back. The side trim must be 3/8" (0.95 cm) above countertop. If unit is not level repeat Steps 5-7 of "Leveling/Adjustments/Alignment" section. 23
![](/manual_guide/products/viking-rver3301-installation-instructions-56f07cb/23.png)
23
1
Connect electrical in shaded area. See the “Electrical
Requirements” section for more information.
Final Installation
2
Slide range into place. Be sure anti-tip
bracket slides into the anit-tip opening.
3/8”
3/8”
(0.95 cm)
(0.95 cm)
3/8”
(0.95 cm)
3
Check that unit is level side to side
and front to back. The side trim must be 3/8” (0.95 cm)
above countertop. If unit is not level repeat Steps 5-7
of “Leveling/Adjustments/Alignment” section.