Viking RVMH Use and Care Manual - Page 27

Replacing Oven Lights, Troubleshooting

Page 27 highlights

Replacing Oven Lights Light Bulbs 1. To replace light bulbs, first disconnect power to the oven at the circuit breaker panel or by unplugging. 2. To release cover, remove the screw on the light cover. (See illustration.) 3. Replace light bulbs with equivalent watt bulb available from your Viking Range, LLC Authorized Servicer or parts distributor. Bulbs are also available at most hardware stores or lighting centers. DO NOT USE A BULB LARGER THAN 30 WATTS. 4. Close light cover and secure with screw removed in step 2. CAUTION Light cover may become very hot. Do not touch glass when light is on. Light cover Screw Light bulbs Troubleshooting Please check the following before calling for service: Place one cup of water in a glass measuring cup in the oven and close the door securely. Operate the oven for one minute at HIGH 100%. A. Does the oven light come on? B. Does the cooling fan work? (Put your hand over the left side of louver.) C. Does the turntable rotate? (It is normal for the turntable to turn in either direction.) D. Is the water in the oven warm? YES _______ YES _______ YES _______ YES _______ NO _______ NO _______ NO _______ NO _______ If "NO" is the answer to any of the above questions, please check electrical outlet, fuse and/or circuit breaker. If they are functioning properly, CONTACT YOUR NEAREST VIKING RANGE, LLC AUTHORIZED SERVICER. A Built-in Microwave Hood should never be serviced by a "do-it-yourself" repair person. Note: • If time appearing in the display is counting down very rapidly, check Demonstration Mode on page 21 and cancel. PrPordoudcut cCtaCreare 25 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

25
E
Product Care
Product Care
Replacing Oven Lights
Light Bulbs
1.
To replace light bulbs, first disconnect power to the oven at the circuit
breaker panel or by unplugging.
2.
To release cover, remove the screw on the light cover. (See illustration.)
3.
Replace light bulbs with equivalent watt bulb available from your Viking
Range, LLC Authorized Servicer or parts distributor. Bulbs are also avail-
able at most hardware stores or lighting centers. DO NOT USE A BULB
LARGER THAN 30 WATTS.
4.
Close light cover and secure with screw removed in step 2.
CAUTION
Light cover may become very hot.
Do not touch glass when light is on.
Troubleshooting
Please check the following before calling for service:
Place one cup of water in a glass measuring cup in the oven and close the door securely.
Operate the oven for one minute at HIGH 100%.
A.
Does the oven light come on?
YES _______
NO _______
B.
Does the cooling fan work? (Put your hand over the left side of louver.)
YES _______
NO _______
C.
Does the turntable rotate? (It is normal for the turntable to turn in either direction.)
YES _______
NO _______
D.
Is the water in the oven warm?
YES _______
NO _______
If “NO” is the answer to any of the above questions, please check electrical outlet, fuse and/or circuit breaker. If they are
functioning properly, CONTACT YOUR NEAREST VIKING RANGE, LLC AUTHORIZED SERVICER.
A Built-in Microwave Hood should never be serviced by a “do-it-yourself” repair person.
NOTE:
If time appearing in the display is counting down very rapidly, check Demonstration Mode on page 21 and cancel.
Light cover
Screw
Light bulbs