Viking VDR548 Installation Instructions - Page 10
Clearance Dimensions
View all Viking VDR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Clearance Dimensions (Proximity to Cabinets) • This range may be installed directly adjacent to existing 36" (91.4 cm) high base cabinets. IMPORTANT: The side trim MUST be 3/8" (.95 cm) above the adjacent base cabinet countertop. This can be accomplished by raising the unit using the adjustment spindles on the legs. • The range CANNOT be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical surfaces above 36" (91.4 cm) high. There must be a minimum of 6" (15.2 cm) side clearance from the range to such combustible surfaces above the 36" (91.4 cm) counter height. • Within the 6" (15.2 cm) side clearance to combustible vertical surfaces above 36" (91.4 cm), the maximum wall cabinet depth must be 13" (33.0 cm) and wall cabinets within this 6" (15.2 cm) side clearance must be 18" (45.7 cm) above the 36" (91.4 cm) high countertop. (913.64"cm) 1(333".0mcamx).(2795-.97/c8m") (61"5.2mcimn.) 4(120"6.7mcinm.) (03.9/58"cm) 1(485".7mcmin). A • Wall cabinets above the range must be a minimum of 42" (06.7 cm) above the range cooking surface for the full width Range WIdth "A" Dimension of the range. This minimum height requirement does not apply if a range hood is installed over the cooking surface. 30" 30" (76.2 cm) 36" 36" (91.4 cm) CAUTION BURN HAZARD 48" 48" (121.9 cm) 60-1/4" 60" (153.0 cm) To avoid risk of personal injury; the use of cabinets for storage above the appliance may result Note: Minimum clearance for back wall is 0" with backguard or high-shelf. in a potential burn hazard. Combustible items may ignite, metallic items may become hot and cause burns. If a cabinet Note: If a range hood is installed, wall cabinets above the range have a different minimum clearance height. storage is to be provided the risk can be reduced by installing a rangehood that projects horizontally a minimum 5" (12.7 cm) beyond the bottom of cabinets. Note: Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and not certified by CSA. Clearances to non-combustible materials must be approved by the authority having jurisdiction. 10