Viking VDR548 Installation Instructions - Page 19
Attach ground lead green
View all Viking VDR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Electrical Connection (4-wire) 1 2 Remove access door. 3 Remove supply cord strain relief bracket and three supply cord mounting screws on the terminal block. 4 Remove grounding screw. Cut-off and discard ground strap. 5 Feed supply cord up through hole in bottom of range back. 6 Attach ground lead (green) with ground screw that was removed. Attach line #1 (red) and line #2 (black) leads to outside terminal. Attach neutral wire (white) to center terminal on terminal block. 19
19
Electrical Connection
(4-wire)
1
2
Remove access door.
Remove supply cord strain relief
bracket and three supply cord mounting screws on
the terminal block.
3
Remove grounding screw. Cut-off
and discard ground strap.
4
Feed supply cord up through hole in bottom
of range back.
5
Attach ground lead (green)
with ground screw that was removed.
6
Attach line #1 (red) and line #2 (black)
leads to outside terminal. Attach neutral wire (white) to
center terminal on terminal block.