Viking VDR548 Installation Instructions - Page 24
Final Installation, Standoff Spacer Removal, Connecting Gas & Electric
![]() |
View all Viking VDR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installation Connecting Gas & Electric DANGER GAS LEAK HAZARD To avoid risk of personal injury or death; leak testing of the appliance must be conducted according to the manufacturer's instructions. Before placing appliance in operation, always check for gas leaks with soapy water solution. • DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS. step 1 Connect gas and electrical. Before placing appliance in operation, always check for gas leaks. This must be performed by your dealer, a qualified licensed plumber, or gas service company. Standoff Spacer Removal DANGER FIRE HAZARD Backguards come standard with standoff spacers which provide a barrier between back of range and rear wall. These must be in place for adequate ventilation. Standoff spacers can only be removed if range is installed against a Non-Combustible wall. Final Installation 1 2 step step Make sure rear trim is properly installed. Slide range into place. Be sure wall anit-tip bracket slides into the anit-tip opening and floor anti-tip hook and bracket are engaged. 24
![](/manual_guide/products/viking-vdr530-installation-instructions-ea80cdd/24.png)