Viking VGR548 Installation Instructions - Page 16
Leg Installation
![]() |
View all Viking VGR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Leg Installation 1 2 step step Legs are packed in cardboard top pack. Note: Legs should be installed near to where appliance is to be used, as they are not secure for long transit. 3 1 1 3 2 Note: It is strongly recommended that a pallet or lift jack be used rather than tilting. Raise unit about a foot. Unscrew shipping bolts from couplings on all four corners. 4 step step Screw legs into couplings on all four corners. The 48" W. ranges have two additional legs located in the center of the unit. Lower range gently to keep any undue strain from legs and internal mounting hardware. Leveling/Adjustments/Alignment 1 2 Measure the four corners in cutout area to verify if flooring is level. For uneven or sloped floors, level unit with metal shims only, as the adjustment required may exceed 16 the thread available in the legs.
![](/manual_guide/products/viking-vgr530-installation-instructions-9831039/16.png)