Viking VGR548 Installation Instructions - Page 22
Performance Checklist, Final Preparation
![]() |
View all Viking VGR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Final Preparation • All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner designed for this material. If buildup occurs, DO NOT use steel wool, abrasive cloths, cleansers, or powders! If it is necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wooden or nylon scraper. DO NOT use a metal knife, spatula, or any other material tool to scrape stainless steel! Scratches are almost impossible to remove. Performance Checklist A qualified installer should carry out the following checks: □ Check top burner ignition. See drawing for proper flame height on HI. The low flame should light at every port. 1-1/2" (3.8 cm) □ Check oven bake function-bake burner on full power. □ Check convection bake function-bake burner at full power with the convection fan on. □ Check broil function-broil burner at full power. □ Check convection broil function-broil burner at full power with convection fan on. □ Check convection fan function-convection fan comes on when switch is turned on. 3/8" (0.95 cm) 22
![](/manual_guide/products/viking-vgr530-installation-instructions-9831039/22.png)