Viking VGR548 Installation Instructions - Page 20
Final Installation, Standoff Spacer Removal, Connecting Gas & Electric
View all Viking VGR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Connecting Gas & Electric DANGER 1 step GAS LEAK HAZARD To avoid risk of personal injury or death; leak testing of the appliance must be conducted according to the manufacturer's instructions. Before placing appliance in operation, always check for gas leaks with soapy water solution. • DO NOT USE AN OPEN FLAME TO CHECK FOR GAS LEAKS. Connect gas and electrical. Before placing appliance in operation, always check for gas leaks. This must be performed by your dealer, a qualified licensed plumber, or gas service company. Standoff Spacer Removal DANGER FIRE HAZARD Backguards come standard with standoff spacers which provide a barrier between back of range and rear wall. These must be in place for adequate ventilation. Standoff spacers can only be removed if range is installed against a Non-Combustible wall. Final Installation 1 2 step step Make sure rear trim is properly installed. Slide range into place. Be sure wall anit-tip bracket slides into the anit-tip opening and floor anti-tip hook and bracket are engaged. 20