Viking VGR548 Installation Instructions - Page 19
Anti-tip Device Installation Floor Mount
![]() |
View all Viking VGR548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation Anti-tip Device Installation (Floor Mount) 1 1-1/4" + B* A Ø(.321/c8m") Locate anti-tip bracket hook on the floor Dim A from side cabinet and 1-1/4" (3.2 cm) from rear wall when using an island trim or high shelf. If using an 8" (20.3 cm) backguard, add Dim B to the 1-1/4". Mark and drill 1/8" (.32 cm) holes where bracket will be located. A B *(Add only when using 8" backguard) 30" 12-3/4" (32.4 cm) 3/8" (.95 cm) 36" 16" (40.6 cm) 1/2" (1.3 cm) 48" 16" (40.6 cm) 1/2" (1.3 cm) 60" 16" (40.6 cm) 1" (2.5 cm) 2 3 1 1 2 Mount anti-tip bracket hook to floor using screws provided. 4 1 2 x2 Remove two screws from back of range. 1 1 2 Attach bracket to back of range using two screws. 19
![](/manual_guide/products/viking-vgr530-installation-instructions-9831039/19.png)
19
Installation
1
A
Ø 1/
8”
Ø 1/
8”
(.32 cm)
(.32 cm)
Ø 1/
8”
(.32 cm)
1-1/4
”
+ B*
1-1/4
”
+ B*
1-1/4
”
+ B*
1
1
2
2
Anti-tip Device Installation (Floor Mount)
2
1
x2
3
1
2
4
1
Locate anti-tip bracket hook on the floor Dim A from side cabinet
and 1-1/4” (3.2 cm) from rear wall when using an island trim or high
shelf.
If using an 8” (20.3 cm) backguard, add Dim B to the 1-1/4”.
Mark and drill 1/8” (.32 cm) holes where bracket will be located.
Mount anti-tip bracket hook to floor using screws
provided.
Remove two screws from back of range.
Attach bracket to back of range using two screws.
A
B
*(Add only when
using 8” backguard)
30”
12-3/4”
(32.4 cm)
3/8”
(.95 cm)
36”
16”
(40.6 cm)
1/2”
(1.3 cm)
48”
16”
(40.6 cm)
1/2”
(1.3 cm)
60”
16”
(40.6 cm)
1”
(2.5 cm)