Viking VRT LP/Propane Conversion Kit - LPKPDR - Installation Instructions
Viking VRT Manual
View all Viking VRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Viking VRT manual content summary:
- Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 1
Installation Guide LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 2
Table of Contents Warnings 3 Kit Contents 4 Regulator Conversion 5 Infrared Broiler Conversion 6 Surface Burner Conversion Sealed Type 1 7 Sealed Type 2 8 Designer Range & Rangetop 9 Orifice Locations 10 Open Type 3 11 Griddle Conversion U-Shape Burner with Spark Ignition 12 Straight Tube - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 3
! DANGER Fire/explosion hazard. IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT supplier's instructions. -If you cannot reach your gas supplier, call the fire department. • Installation and service must be performed by a qualified installer, service agency, - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 4
52 1.24 Quantity (2) (8) (8) (1) (1) (1) (1) (1) (1) (1) (1) (6) (2) (2) (1) (4) (2) (1) Includes Models: VGIC VGR5 VGRC VDR5 VGRT VRT5 VGCC VGSC DCCG DSCG DGRT For information on any other models, please contact customer service at 1-888-845-4641. 4 - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 5
underneath main top assembly. • Open Surface Burner Models Identify regulator type from front of unit by removing grates, burner bowls and grate support from far left side of range/rangetop. CAUTION Before proceeding with conversion, turn off gas supply and disconnect power to unit. • Flip - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 6
. Reverse procedure as needed to reassemble. Preparing for Top Surface Conversion Remove all grates, burner bowls, grate supports, surface burner caps, griddle, grill grates and grill grate supports. NOTE: Some models may not be equipped with all parts mentioned above. IMPORTANT: For models equipped - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 7
Surface Burner Conversion Sealed Type 1 Item #1 Item #2 Locate bag labeled Sealed Burner Orifice Type 1. Remove the venturi (Item #1) by turning counterclockwise. Use a 11/32" (9 mm) socket or nut driver to remove orifice (Item #2) and replace it with orifice from bag labeled Sealed Burner Orifice - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 8
Surface Burner Conversion Sealed Type 2 Item #1 Item #2 Item #3 Locate bag labeled Sealed Burner Orifice Type 2. NOTE: If the burner is a PowerPlus™ Burner (check control panel), use orifice kit 011915-000 to convert this burner only. WARNING DO NOT use this orifice for any other top burners. Remove - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 9
Surface Burner Conversion Designer Range & Rangetop Item #1 Item #2 Item #3 Locate bag labeled Designer Burner Orifice. Remove the screws (Item #1) and set burner base aside (Item #2). IMPORTANT: Burner bases must be handled carefully to prevent igniter wires from becoming disconnected. Loose - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 10
Orifice Locations (#61) (#65) (#57) DGRT301 (#67) (#63) (#61) (#57) DGRT361 (#65) (#67) (#60) (#67) (#58) (#70) DCCG130 DSCD130 10 - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 11
(more depth) or clockwise (less depth). Reconnect igniter wire and reinstall burner. Repeat steps until all surface burners have been converted. Reinstall all grates, grate supports and burner bowls. 11 - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 12
Griddle Conversion (for models equipped with griddle) U-Shape Burner with Spark Ignition Air Shutter Air Shutter SVeotl Screw Orifice Hood Air Shutter Adjustment Screw Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 13
Griddle Conversion (for models equipped with griddle) Straight Tube Burner with Spark Ignition Screw (Rear of Burner) Screw (Front of Burner) Adjustment Screw Air Shutter Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 14
Griddle Conversion (for models equipped with griddle) Straight Tube Burner with Glow Bar Ignition Screw (Rear of Burner) Screw (Front of Burner) Adjustment Screw Air Shutter Remove screws securing glow bar igniter to burner box and place glow bar igniter aside. Remove screws securing metal - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 15
Grill Conversion (for models equipped with grill) Lift flavor grids from unit. Lift flavor grid support from unit. Remove screws securing rear bracket to burner box. Remove screws securing flame shield to burner box. Lift out left and right side burner - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 16
Wok Conversion (for models equipped with wok) Overhead View Orifice Air Shutter Remove center trivet and/or grates, center ring and grate support. Lift and remove burner from unit. Loosen air shutter screw and adjust opening on burner to 5/8" and tighten air shutter screw. Remove orifice by - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 17
by sliding toward rear of range, then lift upward. Remove screws securing toe grille to unit. Remove screws securing burner support bracket to frame of unit and remove burner support bracket. Slide bake burner to the left off of orifice and pull bake burner straight out through available clearance - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 18
Bake Conversion "U" Shaped Air Shutter Air Shutter SeVtoSl crew Orifice Hood Air Shutter Adjustment Screw Remove oven racks and rack supports. Remove oven bottom. Remove screws securing bake igniter to bake burner. Remove screws securing bake burner shield to oven burner box. Remove screws - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 19
: Professional Open Burner Range & Rangetop - On the interior left side of the burner box. To access this label, remove the left side grates and grate support. Professional Sealed Burner Range & Rangetop - Under the control panel. Designer Sealed Burner Range & Rangetop - Under the control panel. 19 - Viking VRT | LP/Propane Conversion Kit - LPKPDR - Installation Instructions - Page 20
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 F20525G EN (021119)
Installation Guide
LPKPDR - Universal LP Conversion Kit for
Professional & Designer Ranges/Rangetops