Viper 5002 Owner Manual - Page 35
shock sensor adjustment
View all Viper 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
shock sensor adjustment ➜ To enter shock sensor adjustment mode: note: The system must be disarmed, and doors and other protected entries (zones 1 and 6) must be closed, and ignition (zone 5) must be off. 1. Press and hold and buttons for 4-seconds. 2. The siren will emit one long chirp and LCD remote will emit 1 long beep when the buttons on the remote are released (or 1 vibrate, or 1 long beep with vibrate) to indi- cate entry into shock adjustment mode. 3. The word "SENSOR" on the LCD transmitter above the adjustment indicator bar will flash for the duration of shock adjustment mode. The sensor bar indi- cator will display the current sensor sensitivity setting. Increased sensitivity is indicated as the bar fills to the right. note: The LCD transmitter will also have the zone 2 icon and the alarm icon indicating. 4. The in vehicle LED will illuminate continuously for the duration of shock adjustment mode. note: When the shock sensor adjustment mode is entered, all other timers and operations are bypassed until shocksensor adjustment mode is exited. 30 © 2006 directed electronics