Viper 5002 Owner Manual - Page 38
Testing Sensor-Use the heel of the palm of your hand
View all Viper 5002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
note: When the shock sensor adjustment mode is exited, the bar indicator will indicate continuously. For example if level 15 was being set (bars 1 through 7 indicating continuously, and bar 8 flashing), upon exiting adjustment mode bars 1 through 8 will indicate continuously. BAR 1 SENSOR LEVEL SETTING SHOWN AT MID-POINT BAR 10 2. Decrease Sensitivity-Press and release the button to decrease shock sensor sensitivity by one step. The siren and LCD remote will emit 1 chirp for each step decreased in adjustment (1 vibrate if programmed). The shock sensor adjustment reaches minimum sensitivity (sensor Off ) when the indicator bar is empty . 3. Testing Sensor-Use the heel of the palm of your hand to strike the door pillar of the car after any increase or decrease in adjustment. The siren will chirp once if the impact was great enough to generate a full trigger. Pre-warn level is set automatically. When desired setting is reached, sensor adjustment mode can be exited. © 2006 directed electronics 33