Viper 5104 Owner Manual - Page 11

Basic Commands (Direct Access) Arm Press and release The alarm arms, doors lock (if connected), and the siren chirps and parking lights flash once. If Valet mode* is On, the doors lock without siren chirps, the alarm is disabled. Exit Valet mode to arm the alarm normally. If a trigger zone fault is detected the siren chirps once again and the control center LED generates a Trigger Zone Fault report**. To Arm and Panic Press and hold The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds the siren and flashes the parking lights. Press the or button to stop the output. Disarm Press and release The alarm disarms, doors unlock (if connected), and the siren chirps and parking lights flash twice. An Alarm Report** alert of 4 or 5 siren chirps will replace the normal disarm chirps if the alarm was triggered. 8 © 2010 Directed Electronics. All rights reserved.