Viper 5104 Owner Manual - Page 27

button on the remote, after 20 seconds return to Step 2 (For Turbo Timer Mode, press the optional dash mounted activation button or send the Timer Mode command. 4. The parking lights flash 5 times to confirm MTS mode is enabled and the remote start activates the ignition outputs. 5. Turn Off and remove the key from the ignition switch, the engine remains running. 6. Exit the vehicle, close all the doors and arm the system. 7. The engine turns off. If the door is opened in Step 1 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtime and can be activated by remote control or optional dash mounted activation button. 1. With the engine running, set the parking brake. 2. Press the optional dash mounted activation button or perform the Timer Mode command. 3. The parking lights turn on and the remote start activates the igni- tion outputs. 4. Turn Off and remove the key from the ignition switch, the engine remains running. 5. Exit the vehicle, close all the doors and arm the system. 6. The engine runs for the Turbo Mode runtime. Note Turbo Timer must be turned on by an authorized Directed dealer. 24 © 2010 Directed Electronics. All rights reserved.