Viper 771XV Owner Manual - Page 28

The pre-programmed run time 12, 24, or 60 minutes has

Page 28 highlights

When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. While the vehicle is running during remote start operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut-down inputs: ➤ The brake pedal is pressed. ➤ The hood is opened. ➤ The shutdown toggle button is put into the OFF position. ➤ The pre-programmed run time (12, 24, or 60 minutes) has elapsed. ➤ 2-way remote button is pressed twice again to stop the vehicle. ➤ The remote responds with remote start off tones and the Yellow LED flashes 3-times. © 2005 directed electronics-all rights reserved 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

25
© 2005 directed electronics—all rights reserved
When you are ready to drive the vehicle:
1.
Insert the ignition key and turn
it to the ON (not the START)
position.
2.
Press the brake pedal.
While the vehicle is running during remote start operation, the
system will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
The brake pedal is pressed.
The hood is opened.
The shutdown toggle button is put into the OFF position.
The pre-programmed run time (12, 24, or 60 minutes) has
elapsed.
2-way remote button
is pressed twice again to stop the
vehicle.
The remote responds with remote start off tones and the
Yellow LED flashes 3-times.
note:
If the brake pedal is pressed before the key is in the
ON position, the engine will shut down.